Curt Trailer Hitch Installation - 2015 Subaru Outback Wagon Video

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

The foam panel is in the bumper to help support the bumper panel as well as provide a cushion for the cover if there is a minor collision. Without the cushion the cover will tend to break or crack easier as it does not have the support needed. I have…

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118467 is the one I recommend over the other two for your 2015 Subaru Outback 2.5i. This brand of harness has less issues than the others. The Hopkins #HM11143885 and the Curt…

Since you want a strong hitch at a decent price I would recommend the Draw-Tite part #75673. This is a Class III hitch with a 2 inch opening that would have more capacity and accessory options than a hitch with a 1-1/4 inch opening. For more info on…

There is very little difference in bumper clearances between the Draw-Tite Trailer Hitch Receiver #76227 and Curt Trailer Hitch Receiver #C13410 that fit your 2015 Subaru Outback. You aren't going to hit a knee on either, as the face of the hitch…

Our trailer hitches are rated separately from the vehicle they fit. Basically they design the hitch to fit the vehicle and to be as strong as possible, they determine the capacities of the hitch, and then that's what they list for it. BUT, the…

You certainly are not alone with the re-installation of the bumper fascia when installing the Curt Trailer Hitch #C13410 or the similar Draw-Tite Trailer Hitch #76227 on your 2017 Subaru Outback. What has been recommended to help resolve this issue,…

For starters, the EcoHitch Hidden Trailer Hitch Receiver part #306-X7601 and your 2015 Subaru Outback Wagon are tested independently of one another which is why you are seeing two different figures. The weakest component in a towing setup is always…

For a hitch that won't require drilling, I recommend the Curt Trailer Hitch Receiver #C13410. This hitch bolts on behind the rear bumper beam on your 2016 Subaru Outback. It features a gloss black powder coat finish, concealed cross tube, and a…

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

I checked with Yakima and for your 2015 Subaru Outback with factory crossbars the recommended Yakima MightyMount needed to install the High Roller is the part #Y03539 that you referenced.