Timbren Rear Suspension Enhancement Installation - 2012 Toyota 4Runner Video

For the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches #325-GH-12001, there is unfortunately no way that you'd be able to use a weight distribution system. I do have another solution though. Sticking with a cushioned Gen-Y ball…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The Timbren Active Off-Road Bumpstops part #TABSTORSEQ which are a fit for a 2023 Toyota 4Runner are pretty similar to the SumoSprings Solo Custom Helper Springs like part #SS68DR. The Timbrens provide more support but the SumoSprings ride smoother.…

As long as you are using the factory coil springs on your 2013 Toyota FJ Cruiser then the 2-1/2" lift kit you have in the rear will not be a problem. If you have a set of taller/stiffer aftermarket coil springs then you would need to test these…

Adding suspension enhancement like Timbrens will help with sag and increase stability and ride quality. If your 2011 Toyota FJ Cruiser is a 4-wheel drive model, for the front you can use #TTOFTAC4A that you have referenced. There is no option for the…

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount part #C83WR won't work with a weight distribution system due to the design of the adjustable shank but we do have a very similar option that will, the Gen-Y Torsion Weight Distribution…

The Gen-Y Torsion Weight Distribution Shank #GY54FR will provide you with up to 6-1/2" of drop. You will need to measure the height of your truck receiver and the height of the trailer coupler when level to determine the correct amount of drop…

When using a single set of tire chains on a vehicle that is 4 wheel drive or all wheel drive you want to install the chains on the primary drive axle. Typically this will be listed in the owner's manual. But for a 4WD drive vehicle the axle to…

For your Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop, 3-1/2" Rise - 7K #325-GH-12001 we have the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome #e98880. This lock fits…

The Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 has a bolt pattern that is unique to the Glyder. There are currently no Pintle style attachments that share that bolt pattern. I would recommend changing out your pintle trailer connection for…

There would be no way to use the Gen-Y Glyder Shock Absorbing Ball Mounts with a weight distribution system but not to worry, Gen-Y does offer the Gen-Y Torsion Weight Distribution Shanks like part #GY54FR which have built-in cushioning and are…

I reached out to Gen-Y, who told me the thickness is approximately 1/2" for the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K #325-GH-12001 and the 6" Drop #325-GH-12005. Along with that, the platform has a…