GCH Automotive Truck Bed Accessories - Truck Bed Cargo Camera - 3460006 Review Video

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need…

I was able to take a picture of the instructions for the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit #3460006 that you referenced. The camera unit actually has a "T" harness that will send the video feed…

It is certainly possible for the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY58GR to work on your 2020 Ford F-250 Super Duty short bed, but there are likely going to be clearance issues as these are meant for long bed trucks. That…

Yes, you can use the upfitter switch on the dash of your 2015 Ford F-350 to switch the Custom Third Brake Light Camera #3460006 on the 8" dash screen when you need to switch from the bumper camera to the 3rd brake light camera. You will simply…

When routing the wiring for the Truck Bed Cargo Camera for 8" Factory Monitor #3460006 you should be able to run it inside the trim that runs from the roof to your dash. Whenever we route wiring on any vehicle this is typically a safe place to…

There aren't any additional instruction manuals from GCH regarding the interconnections of the Truck Bed Cargo Camera #3460006 for your 2013 Ford F-350, however I have attached an image below that you might find helpful. This shows what the…

Yes, you can install the Custom Third Brake Light Camera for 8" Factory Monitor #3460006 on your 2016 Ford F-350 using one of the upfitter switches instead of the red toggle switch that comes with the unit. I am attaching a photo of the…

The Custom Third Brake Light Camera for 8" Factory Monitor part #3460006 which is a fit for a 2015 Ford F-350 does come with a switch that can be substituted for a switch of your own such as a pre-existing upfitter stitch. This was been…

This Custom Third Brake Light Camera for 8" Factory Monitor #3460006 comes with everything needed to complete the install in your truck. It is a custom fit kit for your 2016 Ford F-350 and does not require additional install hardware beyond what…

Yes, we do have camera systems that you can use with the Uconnect system in what I can only assume is a Ram truck. For this, the only confirmed option we have is a truck bed camera like the Truck Bed Cargo Camera for Factory Monitor part #3460015…

Yes, since Reese makes the under bed OEM rail kits for Ford the Elite Rail kit part #RP87FR is the same thing as the rail kit that Ford offers with the trucks new. The hitch I recommend for this rail kit is the B and W Companion part #BWRVK3300 for…

You are correct that the system that you mentioned, the Hopkins Rear View Camera #HM60195VA is activated when the vehicle is only in reverse. However, you could change the installation a little and connect to the running light circuit. Then as long…