Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision
(1 reviews)
Price: $219.98
In Stock
Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision
Item # 3460025
Our Price: $219.98
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (1)
- Q & A (0)
- Photos
GCH Automotive Accessories and Parts - 3460025
- Backup Camera
- Third Brake Light
- Third Brake Light Camera
- For 4.2 Inch Factory Monitor
- GCH Automotive
Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.
Features:
- Custom bezel with camera mounts behind your third brake light so you can see into your truck bed
- Works with your 4.2" factory monitor
- Monitor is measured diagonally from corner to corner
- Assists in connecting your fifth wheel or gooseneck trailer
- Only functions while in reverse
- Works with your 4.2" factory monitor
- Camera manually adjusts 360-degrees for a perfect angle into your truck bed
- Gives you a 150-degree viewing angle
- Rear assist marker lines generated by camera show distance from other objects
- 0 Lux night vision produces a quality picture in complete darkness without IR transmitters
- Switch kit allows you to toggle between truck bed camera and your factory backup camera
- Waterproof, aluminum camera resists dust and corrosion
- IP69-rated to protect against dust and close-range, high-pressure spray downs
- Installation - uses your existing hardware
- Drilling is required if you choose to mount the flip switch
Specs:
- Camera bezel dimensions: 11-3/8" wide x 4-1/8" tall x 1-11/16" deep
- Mounting hole spacing: 9-13/16" center to center
- Camera diameter: 1-1/2"
- Resolution: 620 Lines
- Voltage: 12V - 24V DC
- Wiring harness: 24' long
- 3-Year warranty
Rear Assist Lines
The rear assist lines generated by the system's camera make connecting your fifth wheel camper or gooseneck trailer a one-person job. The lines appear on your 4.2" factory monitor and show the distance from other objects, allowing you to accurately line up your connection point when hooking up your camper or trailer.
0 Lux Night Vision
0 Lux night vision produces a quality picture and gives you the flexibility you need when hooking up your camper or trailer. You can line up your connection point in low-light conditions at dusk, or at night in complete darkness without the aid of IR transmitters.
Switch Kit
The switch kit adds a new dimension to your current setup, allowing you to toggle between views from your truck bed camera and factory backup camera with the flip of a switch. The integrated flip switch can be mounted inside of your truck to give you a clean OEM look and easy access.
Simple Installation
Simply unscrew and unplug your factory third brake light. Once removed, set your new custom bezel with camera in place. Feed the 6' camera wire through the opening into your truck and re-install your factory third brake light in front of the custom bezel.
Connect your 6' camera wire to the 18' wiring harness. This combined 24' wire will extend through your head liner or door sill panel along the edge of the floor, up to the front of your truck, and connect with the included ground and power wiring harness. The power wire will run to your truck's battery.
The switch kit installs by connecting one end of the included T-harness into the factory plug behind your radio, and the other end into the back of your radio. The integrated power wire for the flip switch will run to 12V accessory power.
FRDBRK360SW-K2 Truck Bed Camera for Factory 4.2" Monitor - Night Vision - Switch Kit
This Product Fits The Following Vehicles
- 2009 - 2016 Ford F-250 Super Duty
- 2009 - 2016 Ford F-350 Super Duty
- 2009 - 2016 Ford F-450 Super Duty
Customer Reviews
Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision - 3460025
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
Custom bezel with camera mounts behind your third brake light. Line up your fifth wheel or gooseneck trailer using your vehicle's factory monitor. Switch kit lets you toggle between views from your backup camera and third brake light camera.by: Heykel04/20/2023
It was easy to install and has been working flawlessly
1
1
See what our Experts say about this GCH Automotive Accessories and Parts
- Truck Bed Cargo Camera for 2011 Ford F-250 We currently have two factory monitor truck bed cargo cameras available for your 2011 Ford F-250; the GCH # 3460006 that you already mentioned that's designed for the factory 8 inch screen and the GCH # 3460025 that works with the factory 4.2 inch screen. I recommend taking a quick diagonal measurement on the screen itself inside your truck (from a bottom corner to a top corner on the opposite side). This will give you the actual screen dimension that hopefully corresponds to one of the...
view full answer... - Compatibility of 3rd Brake Light Cargo Camera with Toolbox In Ford Super DutyThe Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit part # 3460006 does feature a 150 degree angle image and 360 degree adjustable camera. If your tool box is up against the cab you can adjust the camera to see over it, but you probably won't even have to considering it's low profile. I have attached a screen shot of the video (and video) that shows the camera angle with a Gooseneck ball for your reference. Please keep in mind this particular camera is made for Fords with 8"...
view full answer...
- Recommended Camera System for 2021 Rockwood 5th Wheel and 2019 Factory Dash MonitorThe Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision # 3460025 is the only system we have that allows the switch to let you select the camera feed on that monitor. I recommend using the Rear View Safety Trailer Tow Quick Connect Kit For Backup Camera Systems # RVS-213-613 and then the Rear View Safety Adapter Cord - 5 Pin Male to RCA Male # RVS-RCA5-AM. This will let you flip the switch to toggle between a factory backup camera on the truck and the camera at the...
view full answer... - Does Truck Bed Cargo Camera # 3460025 Fit 2014 F-450 and Display on MonitorYes, the Truck Bed Cargo Camera # 3460025 you referenced does fit your 2014 Ford F-450 and since it was designed for models with the factory monitor it will display the camera on it.
view full answer... - Camera System for Hitching Goosneck or 5th Wheel Hitch on 2013 Ford Super Duty w/ Headache RackIf your headache rack doesn't block the 3rd brake lamp, we have an option that would work great for you. Take a look at the # 3460008 from GCH Automotive. This system is intended for use on vehicles that don't have the factory reverse camera, and the monitor is included. If your truck has a factory rear view camera already, use the # 3460025 which would utilize your factory 4.2 inch factory monitor. Even if the headache rack blocks the 3rd brake lamp itself, the camera extends about 1-1/2...
view full answer...
- Third Brake Light Camera For 2015 Ford F-250 For Factory MonitorThere is a third brake light camera that will work with your 2015 Ford F-250, and the camera does get connected to the existing plug behind your monitor. The correct one for your truck will depend on the size of your truck's factory monitor: - 4.2" Factory Monitor: Custom Third Brake Light Camera # 3460025 - 8" Factory Monitor: Custom Third Brake Light Camera # 3460006 In regards to installation difficulty, that's pretty subjective; you will need to run wiring but it isn't overly complicated....
view full answer... - Availability of Third Brake Light Camera for 2014 Ford F-250 FX4 LariatAll of our third brake light cameras for your 2014 F-250 can be found under truck cameras on the custom fit page for your truck. I have also added that link below. If you have a factory monitor you need one of the following based on the monitor size: -Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision # 3460025 -Custom Third Brake Light Camera for 8" Factory Monitor - Night Vision # 3460006 If you do not have the factory monitor you could use the # 3460008 which...
view full answer... - Is the Third Brake Light Camera # 3460025 Compatible with My Factory Mirror on My 2011 Ford F-350?I went ahead and reached out to the tech at GCH, and he said that in order to get the Custom Third Brake Light Camera for 4.2" Factory Monitor - Night Vision # 3460025 installed with your factory mirror, you have to hotwire the video input and output for the mirror. Normally, a stereo shop would be able to do the install for you if you don't feel comfortable with the installation. With that being done, the # 3460025 is compatible with your 2011 Ford F-350's factory mirror. The tech at...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Andrew K
Installed by:
Jeff D
Installed by:
Hayden R
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Leah S
Updated by:
Adam Y
Updated by:
Manda E
Edited by:
Amanda M
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.