Customers compare DL25200 to these similar products
Products Featured in this Video
Today, we're going to be taking a look at the Dutton-Lainson TW4000 StrongArm Electric Winch. This winch makes loading and unloading your boat quick and easy. It can be used for other applications other than marine. This winch can handle up to a 4,000-pound boat and it's made in the USA. The winch is a nice compact unit. It features a high impact weather resistant case that provides excellent… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…
view full answer...Since your boat trailer has rollers on it you can use the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 which is rated for a 4,000-lb boat when no rollers are present. This boat winch has a high-impact weather-resistant case which makes it…
view full answer...The attached instructions for the Dutton-Lainson StrongArm Electric Winch, part #DL25200, explain how the wires should be run on your vehicle when installing. You will run the positive wire from the harness under your truck, avoiding any exhaust or…
view full answer...I spoke with my contact at Dutton-Lainson regarding the TW4000 StrongArm Electric Winch #DL25200 referenced in your question. She stated that the winch is not designed to serve as a boat strap when traveling so this is not recommended. Once pulled in…
view full answer...The Dutton-Lanison StrongArm Electric Winch #DL25215 is a great replacement for your current PowerWinch 912 as they have similar ratings, the StrongArm 9,000 is rated to pull up to a 9,000 pound boat, while the PowerWinch 912 is rated for up to a…
view full answer...Yes. There's no reason that the Dutton-Lainson Strong Arm Winch #DL25215 can't be mounted upside down as long as the winch strap isn't rubbing on anything. The capacity of the winch won't be affected with this mounting method, so…
view full answer...On a boat trailer, you will need to position the Duton-Lainson winch, #DL25215, so that the loading ring on the bow of your boat is the same height or a little higher than the winch drum when the boat is loaded on the trailer. You will need to us a…
view full answer...You will be able to use the Dutton-Lainson StrongArm Electric Winch #DL25215 with a fully charged battery that is rated for 105 amp hours. This winch, which draws 70 amps, has a 20' strap and even with a full load reels at 6.3 feet per minute.
view full answer...The Dutton-Lainson Winch part DLB800A that you referenced is not an electric winch. It is a brake hand winch with an 800 lb capacity which is similar to our part #DL16331. With that being said, all of the Dutton-Lainson StrongArm Electric Winches…
view full answer...I recommend the Dutton-Lainson TW4000 #DL25200. It's rated for up to a 4,000 boat and is powered through a quick disconnect hooked up to your tow vehicle's battery. So there's no need to add a battery onto your boat trailer.
view full answer...Assuming that your trailer has bunk rollers instead of boards, the Dutton-Lainson Strong Arm Electric Winch, part #DL25200 should be able to handle that 2500 lb boat with no problem. If the trailer just has boards, the resistance they would cause…
view full answer...You can use a pulley block like part #BDW20005, to pull your car on to a trailer with the winch being offset. You will want to make sure the winch is well secured for safety. This pulley block has a capacity of 17,000 lbs break strength and is…
view full answer...