Draw-Tite Hitch Fabrication Parts - Receiver Tube - 2852 Review Video

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

I have included a picture showing Draw-Tite front mount receiver #65076 installed. It and the Curt hitch install in pretty much the same place.

The wall thickness of the steel can vary from item to item but generally the wall thickness for hitch extender #HE06 is 3/16 to 1/4 inch. For the majority I have seen, it is 1/4 inch.

The Buyers Products 3" to 2" Receiver Tube Adapter part #337RTA302 is a good option to reduce your 3" receiver tube opening to a 2" receiver tube opening.

The #SHP2040-XL will work with most 3 inch receivers as long as the overall width of the receiver tube measured at the hitch pin hole isn't greater than 3-1/2 inches. If your receiver meets that requirement, the #SHP2040-XL will help prevent your…

For a 3 inch trailer hitch the hitch lock needs to have a 3-1/2 inch usable span like what the part #SHP2040-XL has so for your 3 inch hitch with a 2 inch hitch adapter this would fit and work well.

The hitch reducer we have for a 3 inch hitch receiver on a 2017 F-350 is the Buyer's Products Adapter #337RTA302. This will give you only a 3-7/8 inch extension while reducing the size of your receiver opening. If you need a longer extension, I…

The Curt Front Mount Trailer Hitch Receiver #C31078, which is confirmed to fit your 2018 Ford F-250, will actually sit about level with the air dam on the truck meaning it won't change the ground clearance at all. When installing the hitch you…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit on your 2020 Ford F-450 Super Duty. I have linked a video below that will show you the installation process on your F-450. In the video the installer refers to it as an intercooler but…

What you would need is the #FHDPW330300. This is a hinge for a 3 by 3 inch trailer tongue. You'd need to have a welder put 1/4 inch spacers above and below the tube so that it fits yours that is only 2-1/2 inches tall.

I would have a qualified weldor, weld a Safety Chain Loop, #E950, to the bottom of the trailer frame which would give you an attachment point for the safety chains like part #2118-348-04, with Safety Chain Quick Links, #2114-553-04