Review of Derale Engine Oil Coolers - Engine Oil Cooler Kit with Spin-On Adapter - D15451 Video

There are three basic types of heat exchangers. Tube and fin, plate and fin and stacked plate. Stacked plate being the most efficient. Take a look at the informative article about oil coolers I included. The cooler I recommend is the Derale stacked…

Yes, the Derale Stacked-Plate Engine Oil Cooler Kit #D15602 that you referenced does have a thermostatic bypass that prevents oil cooler than 180 degrees from going through the cooler which allows the engine to warm up quickly but then stay cooler…

Based on my research, it looks like your Dodge Challenger uses the 3/4"-16 filter thread size, so the spin-on adapter that is included with the Derale Tube-Fin Engine Oil Cooler Kit #D15551 that you were looking at will actually work perfectly.…

You are actually totally fine. Engine oil does best when it's temperature is right at 225-230 degrees when the vehicle is at operating temperature so there would be no need to keep it any cooler. Synthetic oils can handle up to 300 degrees…

Adding a cooler to your 2009 Chevrolet Suburban will help extend the life of your transmission and help increase the performance. We do offer a transmission and engine oil cooler designed for GM vehicles. It is part #D15903. This cooler has the same…

The Derale Atomic-Cool oil cooler, #D15450, that you reference comes with several adapters to fit numerous motors: 3/4-16, 13/16-16, 18mm x 1.5, 20mm x 1.5, 22mm x 1.5. Based on my research the 5.9 liter used in the 1999 Ram 1500 4x4 Sport will use…

The Edge EZ, #EZD1000A, is preset to level 3 of low boost fueling which is the most responsive. To change the settings you would use an allen wrench to remove the two screws on the front panel. On the other side of the panel you will see 3 jumper…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…