Curt Hitch Ball - Gooseneck Hitch Ball - C40094 Review Video

The Curt Double Lock #C60712 is designed to fit various GM trucks so we need to look for a different solution for your 2023 Ram 3500. Normally the chassis version of a pickup has a bit of a different frame design so for your application I recommend…

There isn't an install/rail kit for the B and W Turnoverball hitches that fits your 2023 Ford F-350 so there wouldn't be a way that we can recommend you install the B and W Hitch Center Section part #BWGNRC920 that you mentioned. The…

The diameter of the hitch ball part #C40094 is 2-5/16 inch. Overall height from bottom to top is 4-3/4 inches, the height of just the base of the ball is 1-3/8 inches.

When I reached out to B & W regarding your question, they advised me that the product #BWHB94004 is not rated for use with a gooseneck. That product is made more for a hitch ball opening on a bumper and it is a threaded application. I have…

The difference between the two rim designs you mentioned is just a visual difference. The mini mod wheels are a white rim that have small circles that run around the mounting flange of the rim whereas the other white style you referenced has…

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

To install the B and W Hitch part #BWGNRK1500 you will need to provide 1/4 thick brace straps to attach the hitch to the frame of the trailer. If you check out the install instructions I attached you can see more about the install process. The…

The size of the hitch ball itself is the same but there are differences between the standard hitch balls and a gooseneck ball. The shank on a standard hitch ball like the hitch ball you came from, part #BWHB94005, is threaded so that the nut can be…

On the hitch ball part #5973 that you referenced the center of the pin hole measures 1-1/4 inches from the bottom of it and then from the top of the shank it measures 1-1/2 inches.

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…