Curt Weight Distribution C17337 Review Video

There are different brackets, like the Replacement Heavy Duty Snap-Up Bracket for Reese Weight Distribution Systems #58392 which will fit tongue weight capacities up to 800 lbs. This is the same bracket that comes with the #RP6637. The #RP21501 is…

The Replacement Trunnion Bar Kit for Curt Weight Distribution System part #C17337 is for a single bar, you'll need two for a complete system.

The Reese Replacement Trunnion, part #58098, is used to hold a trunnion design spring bar into the head of the Reese Weight Distribution System, part #RP66130, or part #RP66131. The spring bar will insert into the trunnion and be held in place with…

For your 2011 Ram 3500, I recommend looking at the Curt Trailer Hitch Receiver #C15409. This Class V Hitch is confirmed to fit your truck and will actually fit models that have the factory hitch as well as those that don't. With that being said,…

Yes, the Malone Foam Blocks for Kayaks will fit perfectly on Thule aero-style crossbars whether it's the older AeroBlade or the newer WingBar Evo. The Thule crossbars have standard dimensions that these foam blocks are meant to fit with. If you…

It does sound like the Prodigy P2 #90885 controller was set too high and caused you to experience brake reverberation. This happens when the brakes are set too high and cause the trailer to jerk when they are applied. When the trailer jerks, the…

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

I spoke with my contact at Horizon Global (parent company of Draw-Tite) regarding your older Draw-Tite Weight Distribution System. He stated that your particular system is comparable to the Pro-Series (also owned by Horizon Global) Round WD System…

Yes, I spoke with my contact at Reese and you will be able to use the 1,500 pound spring bars, #RP58369, with your current Draw-Tite Weight Distribution Head Assmebly 62167. The Trunnion Spring Bars, #RP58369, are the replacement bars for Reese and…

I recommend using the Reese Strait-Line Weight Distribution w/ Sway Control #RP66075 and Gen-Y Torsion Weight Distribution Shank #325-GH-1102 for your 2021 Ford F-250. The Reese System #RP66075 is rated for trailers with a tongue weight of…

To replace the head of your weight distribution system with the Reese Replacement Head for Round Bars part #RP58112 would not be hard at all. Basic tools are the only thing really needed. Basically you will just remove the two grade 8 bolts from the…

Only Curt spring bars can be used with the Curt weight distribution head part #C17307. Spring bars like the Curt bars #C17337 which are for 1,000 to 1,500 lb of tongue weight.