Replacement for Dexter Grease Seal 010-019-00

Question

Question:

trying to find the cross for the Dexter grease seal 010-019-00

asked by: Sean

0

Expert Reply:

Grease Seal # RG06-050 is the replacement part for the Dexter 010-019-00. It is 1.719 inches inner diameter and 2.565 inches outer diameter. It is a fit for 3500 lb axles. This is a confirmed replacement cross-reference.

expert reply by: Jason S

0

Answer 1

The channel on the Rhino Rack Roof Track, part #RRRTV148 is 0.86 inches (a little less than 7/8 inches) by 0.19 inches (a little less than 3/16ths inch). I've included a diagram showing these dimensions. The upper channel is about 5/8…

view full answer...

Answer 2

We have a few systems that will fit the factory tracks on your 2018 Mercedes-Benz Sprinter. If you want the 2 Crossbar system, I recommend the following: Rhino-Rack Vortex Aero Crossbars - 71" Long - Qty 2 #RRVA180B-2 Quick Mount Legs - RTC…

view full answer...

Answer 3

12 inch water column is standard for LP low pressure propane so for a regulator the #108220 would work great as it is an LP regulator capable of 400,000 btu/hr. Now the longest supply hose we have is 12 feet like with the part #37207-31365 which…

view full answer...

Answer 4

The Dexter bearing kit part number K71-717-00 that you referenced is the bearing kit for a number 84 spindle. Our part number for that bearing kit is #BK2-100.

view full answer...

Answer 5

The Karrier ST235/85R16 Radial Trailer Tire - Load Range E, item #AM10295, is the closest tire to the 7.50-16LT tire that we have. Your tire has an overall height of 31.8 inches and a section width of 8.4 inches. The #AM10295, tire has and overall…

view full answer...

Answer 6

The hubs used by the Dexter 4400 lb axle are 3500 lb hubs that have had their weight capacity upgraded by using a LM67048 outer wheel bearing. A 4400 hub like the #8-407-5UC3-EZ would use the same #58846 grease seal as a 3500 lb hub would. Long…

view full answer...

Answer 7

I looked up the dimensions of your Sylvania Microwave SR-11092B (12-1/4" tall x 20" wide x 13" deep) and compared them to that of the Greystone Microwave part #324-000105 (12" tall x 19" wide x 14-5/8" deep). I believe…

view full answer...

Answer 8

The closest grease seal we have available to the measurements you provided is the TruRyde Double Lip Grease Seal #RG06-010. This seal has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. You can use a digital caliper like…

view full answer...

Answer 9

The grease seal you have would indicate you have a 3,500 lb trailer axle. So for a bearing kit you'd want the #BK2-100 and you'd be set.

view full answer...

Answer 10

I cross-referenced the National 471750 grease seal for you and found that the seal has a 1.98 inch outer diameter and a 1.25 inch inner diameter and a .25 inch thickness which is comparable to the #34823 double lip seal we offer. This being said,…

view full answer...

Answer 11

The seal that your mentioned and seal set #RG06-050 have the same inner and outer diameters so yes, you can use set #RG06-050 in place of 17144.

view full answer...

Answer 12

The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit #TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.

view full answer...

Replacement for Dexter Grease Seal 010-019-00

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching