Front Mount Trailer Hitch Installation - 2014 Ford F-150 - Curt Video

The air dam has to be permanently removed on a 2011 and newer For F-150 to install Curt front mount hitch receiver #C31068. Installation on your 2012 F-150 will be basically identical to the 2014 model in the video I have linked showing an example…

For your 2020 Ford F-150 XLT the best front mount hitch is the Curt #C31083 because it's going to sit just a tad higher than the Draw-Tite alternative for better ground clearance. The 2" receiver for the Curt hitch will actually…

The biggest difference between the Curt front hitch part #31198 and Draw-tite front hitch part #65080 is that the Draw-tite receiver tube extends out more than the Curt by over an inch. This makes it more visible when nothing is mounted to it.…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The owner's manual for the 2014 Ford F-150 only shows the gross combined weight rating which is the most that the truck and trailer can weigh together. So I checked the towing guide from Ford for the 2014 model year. Capacity is also dependent…

Looks like the towing capacity of your 2014 Ford F-150 STX with a 5.0 liter V8 has a capacity of 6,300 lbs. The Curt hitch part #C14002 that you referenced is a fit for your truck and has more capacity than you'd need so it would allow you to…

For a front mounted hitch confirmed to fit your 2014 Ford F-150 you would want the Curt hitch part #C31068. We haven't had any reports of intercooler interference with having this hitch installed on a Ecoboost model truck like what you have. The…

We do have a front-mounted trailer hitch for your 2021 Ford F-150, and it will fit so long as your truck does not have the automatically deploying air dam. The correct part is the following, from Curt: - Curt Front Mount Trailer Hitch Receiver…

The Curt Front Hitch #C31083 for your 2020 Ford F-150 actually won't affect the truck's ground clearance at all. This is because the hitch is designed so that the 2" receiver protrudes through the middle of the lower air dam, instead of…

The Draw Tite part #65067 will sit lower to the ground than the Curt hitch part #C31083 which is also a fit for your 2016 Ford F-150. The Draw Tite requires you to notch a couple inches out of the bottom of the air dam up front, but the Curt requires…

Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…

Curt front hitch #C31068 and Draw-Tite front hitch #65061 do indeed look very similar and this is because both are custom-fit products made specifically for your 2014 F-150. Since they both install at the same factory mounting points they will…