B and W Fifth Wheel BWRVB3600 Review Video

Yes, the Head #BWRVC3006 which fits the Base #BWRVB3300 will also fit the Base #BWRVB3600.

Yes, the B&W Companion hitches all use the same head so you can move it to a base that will fit the new Ram trucks with the factory prep package. The base you will need is #BWRVB3600. I have linked a video review of the base for you.

While it is recommended to use a sliding 5th wheel for a short bed truck so that you have plenty of clearance for sharp turns, it is not necessarily required as it depends on your truck and trailer configuration. If you are using the same trailer…

Yes, we do have camera systems that you can use with the Uconnect system in what I can only assume is a Ram truck. For this, the only confirmed option we have is a truck bed camera like the Truck Bed Cargo Camera for Factory Monitor part #3460015…

According to my contact at B & W, you can indeed remove the gooseneck portion of your existing tow prep package and install the #BWGNRK1384 Turnover Ball Gooseneck Hitch you referenced. My contact at B & W tells me the #BWGNRK1384 will bolt…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

For the Ford OEM pucks, the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ford Super Duty #BWRVB3300 weighs 79 lbs as opposed to the Replacement Slider Base for B&W OEM 5th Wheel Trailer Hitch - Ford Towing Prep Package -…

Only certain B&W Companion 5th wheel trailer hitches are compatible with Sidewinder pin boxes like the RP61412. Basically if it is a Companion that mounts in the 4 pucks of a factory prep package then it can be used with a Sidewinder. But if the…

The spacing for the pucks on the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ram #BWRVB3600 is 39-1/8" L x 30-1/2" W from center to center of the pucks so you could expect and overall length of approximately…

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3500 is not compatible with rotating pin boxes even if you lock out the turret. The reason for this has to do with the the excess torque on the single connection point and…

The B and W Companion Base for Ram Fifth Wheel rail kits part #BWRVB3600 that you referenced weighs 142 lbs.