Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Instead of using the Hydraulic Brake Kit #AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right #T4423400 and Left #T4423500. These will fit with…
view full answer...The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…
view full answer...I reviewed all of our trailer wheel bolt inventory and did not have a match for your request. I also contacted our suppliers and was not able to make a match there. The bolts I found were not 13 threads per inch coarse, nor left-handed. I suspect…
view full answer...Dico was bought out by Titan who now offers 5-on 4-1/2 idler hub #DX22XR. This hub is rated for 2500-lb axles and includes bearings, races, grease seal, grease cap, and lug nuts. You can be assured it will fit the trailer spindle as long as the…
view full answer...The best trailer hitch option we have for an International 3800 School Bus is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part #41990-16. This hitch is a great option as it can be bolted-on (once drilled) or welded, the brackets can…
view full answer...I checked with Curt and the distance between the vertical mounting flanges of the Curt #C15300 is 33.312 inches.
view full answer...Thanks so much for the photos, and there isn't a replacement for just the front coupler portion of the long-discontinued coupler you have. So in order to switch out from a 2" to a 2-5/16" coupler attachment, you will need to replace the…
view full answer...For your bearings, I recommend the etrailer.com Replacement Trailer Hub Bearing #LM67048. For your seals, I can't find the part number or dimensions anywhere, so if you send me dimensions of inside and outside diameters, I'll do what I can to…
view full answer...Most likely the outside edge of your trailer tire is wearing because of an issue you are having with the suspension of the trailer. Check the suspension for worn out components or holes that are egg-shaped instead of round where the suspension…
view full answer...Since your circuit breaker does not have different color terminals you will want to look closely on the Pollak 20 Amp Circuit Breaker, part #PK54520, and the Pollak 40 Amp Circuit Breaker, part #PK54540 for markings. The poles will be marked with BAT…
view full answer...There are a few options for your 2000 International 4900 Truck, but there is not a custom fit receiver available. The Super Titan 4000 Weld-On Trailer Hitch with 3" Receiver Opening, 25,000 lbs. #38124 could work but requires the frame on your…
view full answer...While we have a potential option for you, the hitches that fit a 2000 Chevy Express van have mounting holes 40 inches apart, and additionally the manufacturers expressly state they do not fit the cutaway models, so you will need one of the universal…
view full answer...Related Searches
Filter Your Search
Contact and Help