etrailer.com Trailer Hitch Installation - 2018 Nissan Rogue Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer.com hitch part #E98846 is the hitch I recommend for your 2018 Nissan Rogue that has the handsfree lift gate sensors and back up camera. While Nissan recommends a special harness to allow the sensors to still work after a hitch install…

I understand your concern and I don't want to just dismiss it, but the situation you described is not going to happen if you install the Trailer Wiring #118480. If properly route the power wire of this would not wear through. And if that did…

I do have a solution that will allow you to carry a bike rack with your 2018 Nissan Rogue, but due to the spoiler you have at the rear of your vehicle you'll have to go a different route since there aren't any trunk options that fit. The…

The rear hatch sensors will still be functional with the etrailer.com Trailer Hitch Receiver #E98846 installed on your 2018 Nissan Rogue. You will need to kick your foot to the sides of the receiver to activate the sensors but there is no tampering…

The etrailer Trailer Hitch Receiver part #e79YR which is a fit for a 2019 Nissan Rogue Sport also fits the following: 2017 - 2022 Nissan Rogue Sport If you need replacement hardware, we do offer this as the Replacement Hardware Kit part #RHK.

The Sport versions of the 2018 Nissan Rogue actually require a different hitch fit. Instead you'd need the part #76177 which does accommodate the frame differences you mentioned.

I took a look at the online version of the owner's manual for a 2018 Nissan Rogue and it does state that the "Maximum Tongue Load" is 110 lbs, like you mentioned. Even if you are not towing a trailer this would apply and you do need to…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish…

The etrailer Trailer Hitch Receiver #e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch #75902. I felt that the best way to show you is with a picture that I have…

You would not lock out the steering on the vehicle being flat towed. Doing so would cause the wheels to scrub (drag sideways) when turning. The steering needs to be unlocked and the wheels will turn accordingly and straightened back out when needed.…

Hollywood Racks RV Rider Bike Rack #HLY64FR (HR1700) has padded clamps to mount to the bike frame and is approved for car, van, truck, SUV, motorhome, fifth wheel, and flat towed vehicle usage. It has slightly larger dimensions than the HR1500 with…