Comparing Draw-Tite, Hidden Hitch, and Curt Trailer Hitches for a 2010 Mazda 3

Question

Question:

I am looking at purchasing a trailer hitch and a bike rack for my 2010 mazda3 hatchback. I noticed the Hidden Hitch 60259 and the Draw-Tite 24843 both have the 1 1/4 notch. My first question is will either the Swagman S64650 or S64670 or the Sportrack 2901LR bike rack work? They state they are for class 1 and 2 but will they work with the class 1 notch. If not, does the Curt have the notch? I prefer the Hidden or the Draw-Tite because they do not require the stabilizer strap which would be difficult to use on my hatchback because of the rear spoiler. Also, what is the difference between the Hidden Hitch and the Draw-Tite? I know they are owned by the same parent company so I am just trying to know what the difference is.

asked by: Jeremy

0

Expert Reply:

You have done your research. As you have seen, all of the hitches for the 2010 Mazda 3 are Class I trailer hitches. The Draw-Tite and Hidden Hitch models do have the safety notch in them that prevent the insertion of a Class II accessory. This is so you will not accidentally overload the hitch. The Curt hitch does not have this feature. This notch and the capacity are what makes a Class I hitch a Class I.

As you have said neither the Draw-Tite nor Hidden Hitch models require the use of a stabilization strap, # 18050, but the Curt hitch does. The difference between the Draw-Tite and Hidden Hitch models is that the Hidden Hitch model comes with a ball mount, pin, and clip for towing. The Draw-Tite model is just the hitch. If you are only going to use it for a bike rack, then the Draw-Tite Hitch, # 24843, is the way to go. I have included a link to the installation instructions for you.

All of the bike racks you have referenced, Swagman # S64650, # S64670, and SportRack SR2901LR, will all fit a Class I hitch (Draw-Tite, Hidden Hitch, or Curt). Out of the 3, the most popular and what I recommend is the XTC-2, # S64670. I have included a link to the installation details and a link to a video review for you.

expert reply by: Michael H

0

Answer 1

Draw-Tite Class I hitch #24816 fits several model years of the Mazda 3 and it has a maximum trailer weight capacity of 2000-lbs, along with a maximum tongue weight rating of 200-lbs. If your loaded trailer weighs less than 2000-lbs and places no more…

view full answer...

Answer 2

For your 2018 Mazda 3 we have Curt and Draw Tite hitches available. I recommend the Draw Tite hitches over the Curt hitches as they don't require the use of a stabilizer strap when carrying a non-supported load like a bike rack. So if you have a…

view full answer...

Answer 3

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 4

I have an answer for you. When it comes to using a hitch adapter on your 1-1/4 inch hitch to accommodate a 2-inch accessory, it is important to note that any time you use an adapter/extender, you will be decreasing the overall weight capacity of the…

view full answer...

Answer 5

The stabilizing straps are a warranty requirement that Curt recommends to help support the hitch. The strap reduces some of the tongue weight load on the hitch, reduces the tendency for attached items to move around while the vehicle is in motion,…

view full answer...

Answer 6

The Curt Class I hitch you referenced, part #C11393 is indeed a fit for your 2010 Mazda 3 Sedan. If you click the provided link, you can see our Returns Policy. I've also linked you to the installation instructions and a video showing the hitch…

view full answer...

Answer 7

All three components of the Rhino Rack part numbers #RRVA118B-2, #RRRLKVA, and #DK289 would be needed. The bars, the feet, and the adapter kit that attaches the feet to the factory fixed mounting holes of the roof of the vehicle.

view full answer...

Answer 8

Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C11393 will not contact the exhaust on your 2012 Mazda 3 sedan.

view full answer...

Answer 10

The Curt light-duty Class I trailer hitch receiver you referenced, part #C11393, is a fit for the sedan versions of the 2010-through-2013 Mazda 3 with or without LED taillights. This particular hitch fits no other vehicles. The hitch comes with all…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Comparing Draw-Tite, Hidden Hitch, and Curt Trailer Hitches for a 2010 Mazda 3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching