Can Weight Distribution Be Used on an Aluminum Car Hauler Trailer
Question:
I am purchasing a used Forest River 20foot car trailer/hauler. 3500 lbs. axles, 7000 GVW. It has an aluminum frame and an aluminum diamond plate tool box mounted on the tongue. What type of load distributing hitch will work? Thanks.
asked by: Barry G
Expert Reply:
You should not have any issues using weight distribution with your aluminum trailer, but you will want to check with the trailer manufacturer to be certain. My contact at Reese has stated that as long as the trailer manufacturer says it's ok then their systems would work well on aluminum trailers.
Since you have a tool box above the frame on your trailer you will need to use bolt on brackets, part # RP58305 since you do not have clearance above the frame for the standard chain hangers.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well.
Once you determine your tongue weight check out the link I attached to the right that will take you to a page that has all of the WD systems we carry. Select your tongue weight from the filters on the left and the correct kits for your application will be listed.
Product Page this Question was Asked From
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Tow Ready Trailer Hitch Receiver Lock for 2-1/2" Hitches - Flush - 3-1/2" Span
- Shop: Roadmaster Quiet Hitch for 2" Trailer Hitches
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Article: Trailer Wiring Diagrams
- Search Results: trailer backup lights led
- Search Results: trailer storage box
- Shop: Trailer Hitch
- Shop: Replacement Head for Fastway e2 Weight Distribution Systems - Trunnion Bar
- Search Results: weight distribution hitch
- Search Results: trailer alarm
- Search Results: trailer lug nuts
- Search Results: trailer winch box
- Search Results: generator box
- Q&A: How to Carry Generator on Camper Trailer Tongue
- Shop: Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop
- Shop: Equalizer Weight-Dist Shank - 2" Hitch - 12" Drop x 15" Rise - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Q&A: Is It Better To Carry Bikes Behind Flat Towed Vehicle or Above Tow Bars?
- Article: My Trailer Hitch Doesn't Fit
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer Hitch Pin Alignment Collar Review
on Accessories and Parts
