Availability of a Torklift Magnum Hitch D1103

Question

Question:

You dont seem to have it listed, but can you get me a Torklift Magnum D1103-30? Price? Thanks,

asked by: Wade

1

Helpful Expert Reply:

I believe you are looking for the TorkLift SuperHitch Magnum Trailer Hitch # TLF1002-30. This hitch is confirmed to fit the following trucks:

2015 - 2015 Ford F-250 Super Duty

2005 - 2014 Ford F-250 and F-350 Super Duty Pickups only

2015 - 2015 Ford F-350 Super Duty Pickups only

2008 - 2015 Ford F-450 Super Duty Pickups only

1999 - 2004 Ford F-250 and F-350 Super Duty Pickups with Standard or Step Bumper

expert reply by: Jameson C

1

Answer 1

Aside from the additional weight capacity of the TorkLift SuperHitch Magnum #TLF1002-30 over the TorkLift SuperHitch Original #TLF1002, the main difference is that the Magnum has a top receiver that is 2-1/2" and a bottom receiver that is…

view full answer...

Answer 2

If your 1999 F-350 has a deep drop bumper, the TorkLift SuperHitch Magnum Trailer Hitch #TLF1002-30 is a confirmed fit for your vehicle. This heavy-duty hitch lets you tow hefty loads even when using a TorkLift hitch extension or weight…

view full answer...

Answer 3

I have a replacement hitch option for you, but unfortunately the side plates and hitch body are both vehicle specific so you cannot just replace the side plates to mount your existing hitch from your 2013 Chevrolet Silverado 3500 DRW onto your 2003…

view full answer...

Answer 4

TorkLift rates the installation difficulty of the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" #TLF1002-30 you were looking at for your 1999 Ford F-250/350 at a 6 out of 10 due to needing to…

view full answer...

Answer 5

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

You're welcome Chris! Sounds like you've more then got the hitch covered. I can not think of a better option then the TorkLift SuperHitch Magnum Trailer Hitch item #TL74FR. You will be able to pull anything and everything with this hitch and…

view full answer...

Availability of a Torklift Magnum Hitch D1103

Product Page this Question was Asked From

Continue Researching