How Short Can the BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Strap # IMF17663 Be Adjusted To

Question

Question:

what is the shortest length the transom straps can be used on? Including the hooks.

asked by: Keefe

0

Expert Reply:

I went out into our warehouse and grabbed a BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Strap # IMF17663 to measure it and found that it measures 13 inches from the end of one hook to the other when the strap is adjusted as tight as it can go.

I attached a review video for these for you to check out as well.

expert reply by: Jameson C

0

Answer 1

The only way I can recommend a tongue extender for your trailer that has a 3 inch by 3 inch channel is to remove your current coupler, install the hinge kit part #FHDPW330300 in place of it and then install your coupler onto a length of 3 by 3…

view full answer...

Answer 2

I went out to the warehouse and pulled a BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap #IMF17634 to measure it for you. Both the fixed end and the ratcheting end of the straps are about 5 feet long (just the strap part. From the end of the…

view full answer...

Answer 3

When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…

view full answer...

Answer 4

I have an option for you, but we do not have any bunk brackets that match what you currently have installed. Instead I recommend the CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4 #CE10000G-4 which will attach to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 7

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 8

Thank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K #DX29FR to replace your current actuator. The #DX29FR has a 7500lb trailer weight…

view full answer...

Answer 9

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 10

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 11

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...