Manufacturer of TruRyde Bearings and Seals

Question

Question:

Could you please tell me the manufacturer of your TruRyde bearings and seals. Thank you.

asked by: Ken M

0

Expert Reply:

The manufacturer of the TruRyde bearing and seals we carry like what come in the kit # BK2-100 is TRP International.

expert reply by: Jameson C

0

Answer 1

The attachment bolts for a 5-bolt brake assembly like the part #AKEBRK-6R should be torqued to 30-50 foot/lbs. If you don't have a torque wrench handy, if you tighten the bolts until the lock washers flatten out, you'll be pretty darn…

view full answer...

Answer 2

Both the Dexter Electric Trailer Brake Kit #23-47-48 and the Electric Trailer Brake Kit #AKEBRK-2 are excellent options to replace the brake assemblies on your 2009 Palomino Pony pop-up camper. A lot of the Dexter Axle kit price comes from the name…

view full answer...

Answer 3

We recently had a short training session in which the difference between our brakes such as #AKEBRK-10R and Dexter brakes were revealed. The biggest difference is the brake pad material. It is thicker on our house brand brakes. Also, on our brakes…

view full answer...

Answer 4

Not all bearings are created equal, but you would be hard-pressed to find one that is vastly superior than another. Whether it is TruRyde, Timken, or some other brand, if the bearings are properly maintained, used in the correct hub, and within the…

view full answer...

Answer 5

Both the MORryde Rubber Equalizers #MR87ZR and Dexter E-Z Flex Suspension Kit #K71-652-00 are achieving the same result. They are doing so with slightly different designs but end up with the same result. I recommend using the Dexter E-Z Flex…

view full answer...

Answer 6

I have attached for you below all the parts you requested for your 2019 Grand Design Reflections 303RLS. 5-Leaf Double-Eye Spring part #e34SR MORryde Suspension Upgrade Kit for Tandem Axle Trailers part #MR46ZR MORryde Shock Absorbing Suspension…

view full answer...

Answer 7

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...

Answer 8

For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.

view full answer...

Answer 9

The best way to find the correct bearings, races, or seals for your trailer is to remove a wheel and hub and get the numbers off of the current components you have. If you are unable to fid the numbers on the bearings or seals or races, you can use a…

view full answer...

Answer 10

I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part #25580 for the bearing itself and…

view full answer...

Answer 11

Yes, you can manually adjust self-adjusting brakes with a spoon like the drum brake spoon #W80630. If you let me know what is going on with your brakes I can try to help you troubleshoot why your brakes need to be adjusted.

view full answer...

Answer 12

A replacement equalizer will be necessary if the rubber core needs to be replaced. If you measure your equalizer you will be able to determine which replacement you need. For example, the #013-144-03 Replacement Equalizer measures 7-3/4" from…

view full answer...

Manufacturer of TruRyde Bearings and Seals

Product Page this Question was Asked From

Continue Researching