Safety Chain Loops for a 2014 Ram 2500 with Factory 5th Wheel/Gooseneck Prep Package

Question

Question:

My 2014 ram 2500 has the fifth heel prep/gooseneck package. Do they make safety-chain loops that fit the front holes so I can use them as tie downs

asked by: Kenneth P

0

Expert Reply:

For just safety chain loops for the OEM 5th wheel/gooseneck prep package on your 2014 Ram 2500, you will need to use # RP30145. These are sold in quantities of one so if you wanted 2 you would enter 2 in the quantity box.

expert reply by: Michael H

0

Answer 1

I contacted both Curt and Reese who both confirmed that there is a difference between the front and back puck sizes on your 2017 Ram 3500. This means that the safety chain loops that come with the Curt #C60618 and the Reese #RP30140 will only be…

view full answer...

Answer 2

In order to adjust the height of the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box part #GY58GR you'll need to do so at the connection to the trailer or the wings. That's the only way to adjust the height of a pin box. The design…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 6

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Answer 7

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 8

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 11

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY83XR is specially designed to work with the Ram factory puck system. It will push the connection point for the gooseball and your trailer back 5" towards your tailgate.…

view full answer...

Answer 12

The puck feet on the Gen-Y Hitch Gooseneck Trailer Hitch for Dodge Ram OEM Puck Systems #GY83XR is just to help stabilize the ball mount and does not lock into place in the puck. The locking mechanism on top will lock the shank into the gooseneck…

view full answer...