Can you Keep the Same Lock and Key Numbers with the Thule T2 2-Bike Expansion Accessory

Question

Question:

Hi, Im interested in the Thule T2 bike carrier for my 2011 gmc acadia and my question is do I have to buy the 6 lock set if I intend to purchase the add on? Eventually I want to be able to carry 4 bikes. Is it possible to have 1 key that will eventually open all locks ?

asked by: Louis V

1

Helpful Expert Reply:

This rack comes with locks for both the carrier and the bikes. and they are all keyed alike. The Thule T2 Pro XTR Bike Rack, # TH69TX, kit can be set up to carry 2 or 4 bikes as needed.

expert reply by: John H

1

Answer 1

The Kuat NV 2.0 does not include a wheel adapter for 20-14 inch wheels, it was sold separately as part 016-025-00-00, but is no longer available

view full answer...

Answer 2

Verify the tongue weight capacity of your trailer hitch recevier and your Lexus NX200t to make sure you can handle the weight of a fully loaded bike rack. You definitely need a 2 inch Class III hitch on the Lexus which are available so hopefully you…

view full answer...

Answer 3

With the Kuat NV Base 4-Bike Rack part #BA22B-BA02B you have to use the adapter #016-025-00-00 if the bike wheel is between 20 and 24 inches. Unfortunately this part has been discontinued, and there is not a replacement option.

view full answer...

Answer 4

The Kuat NV 2.0 #NV22B measures 55-1/8 inches wide overall, folded or unfolded. The height when folded is 25-3/4 inches. When unfolded it is approximately 13 inches tall. When unfolded the rack is 37-3/8 inches front to back. When folded up it is…

view full answer...

Answer 5

To determine if the Thule T2 Pro XTR part #TH69TX is going to fit your 2017 Jeep Cherokee and allow it to fold up without bumper interference will require you to measure from the center of the hitch pin hole out to the furthest point out on the rear…

view full answer...

Answer 6

Because of the way the Thule T2, #TH9044-TH9046, is designed, there is actually a rise of 4-3/4 inches from the top of the receiver opening on the trailer hitch to the bottom of the nearest platform. The rack angles up even more towards the back and…

view full answer...

Answer 7

The Kuat NV 2.0 #BA22B-BA02B that you referenced can be split and be just a 2 bike rack if you only needed to carry 2 bikes. And then you could easily install the add-on section to make it a 4-bike rack. The add-on section though can not be used as…

view full answer...

Answer 8

The Replacement Key for Thule Racks and Carriers #THKEYY041 is the only Y041 key that we carry. We only carry replacement keys that are provided to us from our manufacturers. We do not make any of our own. The Replacement Key for Thule Racks and…

view full answer...

Answer 9

I went ahead and checked for a replacement key for your Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #NV22B, and it does not appear that Kuat offers a replacement. Instead, what you can do is use the Replacement Lock Cores for…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...