What Does the Replacement Thule Y041 Key Work With

Question

Question:

I also need an extra key busted one of them. The key is for a Nashbar bikerack and has Y041 printed on it, but it doesnt have the same pattern as the one printed on your website. There is no code on the lock itself Y 041 is printed on the plastic cover. Do you have this key?

asked by: Brian

0

Expert Reply:

The Replacement Key for Thule Racks and Carriers # THKEYY041 is the only Y041 key that we carry. We only carry replacement keys that are provided to us from our manufacturers. We do not make any of our own. The Replacement Key for Thule Racks and Carriers # THKEYY041 works with Thule Y041 locks.

That being said, if Nashbar Bikes uses Thule locks then the Replacement Key for Thule Racks and Carriers # THKEYY041 would work. But it is unlikely that is the case.

expert reply by: Scott S

0

Key with Y041 Printed on it
(click to enlarge)

Answer 1

The Replacement Key for Thule Racks and Carriers part #THKEYY041 is pre-cut for the lock code 041. If this lock code is printed on your SportRack Crest 2 Bike Rack lock core face then it will work well for you. If you have a different lock core code…

view full answer...

Answer 2

This rack comes with locks for both the carrier and the bikes. and they are all keyed alike. The Thule T2 Pro XTR Bike Rack, #TH69TX, kit can be set up to carry 2 or 4 bikes as needed.

view full answer...

Answer 3

It sounds like your lock core is a Thule core. You will use the Replacement Key for Thule and Sportrack Racks and Carriers - Y041 #THKEYY041. Nashbar uses many different manufacturers for their products so it is likely you have a Thule rack. Simply…

view full answer...

Answer 4

I went ahead and checked for a replacement key for your Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount #NV22B, and it does not appear that Kuat offers a replacement. Instead, what you can do is use the Replacement Lock Cores for…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

A cover being installed on your spare tire would not prevent the Swagman Bike Rack part #S80501 from installing. The rack would still fit and work well. You might still compare the dimensions in the picture I attached with you spare tire so that you…

view full answer...

Answer 10

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Does the Replacement Thule Y041 Key Work With

Product Page this Question was Asked From

Continue Researching