Replacement Vent Lid for an Elixir Vent
Question:
I have a broken Elixir vent cover ANS Z26 AS-13, D.O.T. 162. It measures 15: X 15 1/8inch at the bottom edge the upper recessed portion of the cover is 1foot square. Do you sell a replacement model? Id like to replace it and also add a vent cover such as a MaxxAir. Are you able to help me, please? Thanks very much.
asked by: Stew T
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Products Referenced in This Question
Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- LaSalle Bristol
more information >
Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- Tinted
- Ventline
more information >
Camco RV Vent Installation Kit - Rubber Roofs or Sidewalls - White Butyl Tape
- Accessories and Parts
- RV Vents and Fans
- Vent Install Kit
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Camco
more information >
MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent - Translucent White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- MAXXAIR
more information >
Product Page this Question was Asked From
Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- 14W x 14L Inch
- Plastic
- White
- Ventline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Adapter Rails for Curt 5th Wheel Hitch - Ford and Chevy/GMC Towing Prep Package
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Metal Base - Polypropylene - White
- Shop: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape - Plastic
- Q&A: How to Adjust Self-Adjusting Trailer Brakes
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - Smoke
- Shop: Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic
- Shop: Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
- Shop: Camco Replacement Lid for Jensen RV Roof Vent w/ Pin-Style Hinge - Polypropylene - White
- Q&A: Replacement Cover for Model 57915.303 Air Conditioner on 1990 Passport
- Q&A: Replacement Landing Gear Motor for Venture M-9000-PK Motor and Replacement Aluminum Gearbox
- Q&A: Replacement Bearings and Seal for Dexter 6,000 Pound Axle
- Search Results: rvil22
- Video: Ventline Ventadome Replacement Vent Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 44649
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Video: Ventline Ventadome Trailer Roof Vent Installation
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Search Results: 68149
- Shop: Brake Controller
- Video: Ventline Trailer Roof Vent Installation
- Search Results: dust cap