Towing and Tongue Weight Capacities of B & W Class V Hitch # BWHDRH25182

Question

Question:

What is this hitch rated for without weight distribution?

asked by: Maurice J

0

Expert Reply:

The B & W # BWHDRH25182 hitch you mentioned has the same 16,000 lb towing/ 1600 lb tongue weight capacity regardless of whether or not it's used with weight distribution. This capacity might be limited by the capacity of the vehicle, if it's lower.

If you'd care to see the installation instructions, please click the provided link.

expert reply by: Mike L

0

Answer 1

The RV/Camper hitches we currently have available, like the Curt Adjustable Trailer Hitch Receiver #C13701, will have a maximum tongue weight of 500 pounds. This will fit frames anywhere from 18" wide all the way up to 51" wide, so…

view full answer...

Answer 2

I would be happy to help you find a hitch for your friends 2018 Ram Truck. We have a couple of options for class IV hitches depending on which model truck your friend has. I have listed them below and linked an installation video: Ram 1500: Draw-Tite…

view full answer...

Answer 3

In order to install the Solera 18V Power RV Awning part #LC730523 you will indeed need to obtain an awning rail equal to the length of the awning. The Solera Awning Rail Extrusion part #LC715216 is sold in 8' sections so you will need to obtain…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Towing and Tongue Weight Capacities of B & W Class V Hitch # BWHDRH25182

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching