How Far Below the Bottom Edge of Bumper Fascia Do Hitches For 2013 Volvo XC60 Extend

Question

Question:

looking for a hitch for my 2010 Volvo xc60 just had a question, is the hitch powder coated and how far down from the frame does the receiver bottom sit when mounted. Or how far below the rear valance does it sit. Thanks for your help.

asked by: Ken

0

Expert Reply:

The Draw-Tite # 75671 and Curt # 13268 Class III hitches both feature a durable powder coated finish. As you can see in the accompanying photo I provided, both hitches will have about a 1 inch reveal below the bottom edge of the bumper fascia. Keep in mind that if your XC60 is the R Design model, some fascia trimming might be needed.

Both hitches would install in the same manner, and share identical weight capacities. I'd recommend the Curt # 13268 as it's the least expensive.

If you'll be using the hitch for towing purposes, you might also need the following:

Trailer wiring harness, part # 118739
Ball mount, part # AMSC2
1-7/8 Inch trailer ball, # 19260
2 Inch trailer ball, # 63845
Locking hitch pin, # e98882

I've linked you to an install video for the hitch I recommended.

expert reply by: Mike L

0

click to enlarge

Answer 1

The Curt Trailer Hitch Receiver #13268 that fits your 2012 Volvo XC60 comes with a limited lifetime warranty from Curt. I recommend installing the T-One Vehicle Wiring Harness #118739 when you install the receiver. This will give you a 4-way flat…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

For your 2024 Toyota RAV4, the best trailer hitch receiver that will fit is the following: - etrailer Trailer Hitch Receiver #e23ZR The #e23ZR is the best because it has completely concealed crosstube so only the receiver is showing, allowing your…

view full answer...

How Far Below the Bottom Edge of Bumper Fascia Do Hitches For 2013 Volvo XC60 Extend

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching