What Size Fitting is Needed on a Flexible Brake Line for Kodiak Disc Trailer Brakes

Question

Question:

I have a 2011 Heartland Bighorn with 7000lb Lippert axles, I am trying to determine which flexible brake lines to order when I order the parts to convert to disc brakes.

asked by: Donald A

0

Expert Reply:

You will be looking for a flexible hose with 3/16 inch fittings for Kodiak disc brake kits . We have numerous depending on the length you need. I have included a link to all of the options for you.

expert reply by: Michael H

0

Answer 1

The CAM from the Carlisle Control Adapter Module #HBA-CAM stands for Control Adapter Module. The purpose of this unit is to adapt the Carlisle HydraStar Electric-Hydraulic Actuator #HBA16 to the following brake controllers. Ford factory controller…

view full answer...

Answer 2

I have a few different options for you but the issue with using an electric over hydraulic actuator and factory trailer brake controller together are not particular to any one brand whether that be the actuator brand or brake controller brand, they…

view full answer...

Answer 3

As far as your spindle is concerned all that matters is that the inner diameter of the bearing is the same, which it is between the bearing numbers #14125A and #02475 so the 9/16 inch stud kits you mentioned for the Lippert 7k axles would work well.…

view full answer...

Answer 4

It may be possible to change your studs from 1/2" to 9/16" so long as the studs are drive-in (as opposed to threaded); also, the length and knurl diameter needs to be the same. For example, the Kodiak Wheel Bolt - 9/16" Diameter x…

view full answer...

Answer 5

Integrated brake controllers are notorious for not always working well with electric over hydraulic actuators. Sometimes it's just easiest to replace the controller with aftermarket. What actuator does your trailer have? If it is a Hydrastar like…

view full answer...

Answer 6

In order to upgrade from a 6 on 5-1/2" bolt pattern to a 8 on 6-1/2" bolt pattern on a Dexter 6K Axle you'll need the Dexter Trailer Hub and Drum Assembly part #42866UC3-EZ. The Dexter 5,200 lb - 7,000 lb axles all have the same size…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You can convert surge brakes to an electric over hydraulic braking system. To do this, you will need an electric over hydraulic actuator and a brake controller. For an electric over hydraulic actuator, I recommend looking at the Carlisle HydraStar…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

Hey Chris, the overall height of the Aries AdvantEdge Headache Rack #AA88VB that you referenced is 26-1/2 inches. It's not difficult to remove but wasn't designed for getting removed and installed super easily. There's no reason it…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

What Size Fitting is Needed on a Flexible Brake Line for Kodiak Disc Trailer Brakes

Featured Help Information

Miscellaneous Media

Continue Researching