Availability of Longer Class V Ball Mount So Tailgate Clears Trailer Jack
Question:
Hi, I am looking for a ball mount that will allow me to my tailgate down clear of the jack on my travel trailer. So, what I need is a class V ball mount with a 3-5inch drop but the distance between the ball hole and pin hole needs to be greater than the 10inch standard. Do you have a product like this? Thanks
asked by: Jason L
Expert Reply:
All of the ball mounts we offer for the Class V 2-1/2 inch receiver have the same 10 inch ball hole to pin hole distance you mentioned.
This being said, I might have a solution for you. You can use a reducer sleeve like part # C45405 along with a ball mount like part # BWBMHD30013. The ball mount has a 16K capacity, and a hitch pin hole to ball hole distance of 11-3/8 inches. Draw-Tite offers a 12K model with a hole to hole distance of 12 inches and a 4 inch drop, part # 4285.
If your hitch is the Class V OEM Ford receiver, keep in mind that the later model Fords (2011+) Class V hitches had inside corners that had a different radius. If this is the case with your truck, you might need to sand the corners of the reducer to get it to fit into the receiver.
Products Referenced in This Question
Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Silver
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- Class IV
- Long Shank
- Draw-Tite
more information >
Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Hitch Adapters
- Hitch Reducer
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- No Extension
- Fits 2-1/2 Inch Hitch
- 2-1/2 Inch to 2 Inch
- CURT
more information >
Product Page this Question was Asked From
B&W Heavy-Duty Ball Mount - 3" Rise, 4" Drop - 11-3/8" Long - 16,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- B and W
more information >
Continue Researching
- Shop: B&W Heavy-Duty Ball Mount - 3" Rise, 4" Drop - 11-3/8" Long - 16,000 lbs
- Shop: Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 12" Long - 12,000 lbs
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 10,000 lbs
- Shop: B&W Heavy-Duty Ball Mount - 3" Rise, 4" Drop - 9-5/8" Long - 16,000 lbs
- Video: B and W Ball Mounts - Fixed Ball Mount - BWBMHD30013 Review
- Shop: Curt Hitch Receiver Reducer Sleeve - 2-1/2" to 2"
- Shop: Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Shop: Curt Heavy Duty Forged Ball Mount for 2" Hitches - 3" Rise - 4" Drop - 17,000 lbs
- Q&A: What is the Best Grease for Trailer Bearings
- Q&A: Comparison of B&W BWBMHD30011 and Curt C45312 Ball Mount
- Q&A: 2 Inch Hitch Ball Recommendation for B&W 16K Heavy-Duty Ball Mount
- Q&A: 16K Rated Ball Mount Made in the USA for 2 Inch Trailer Hitches
- Q&A: Ball Mount for 3 inch Trailer Hitch Similar to B and W BWBMHD30012
- Q&A: How to Choose Correct Rise/Drop in a Ball Mount to Tow Level Enclosed Tandem Axle Trailer
- Q&A: Material and Construction of Draw-Tite 2 Inch Ball Mount # 4285
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 25580
- Search Results: hitch
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 90160
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Shop: Suspension Enhancement
- Search Results: brake controller
- Video: Timbren Axle-Less Trailer Suspension System Installation