Rear Frame-Mounted Camper Tie-Downs For A 2019 Ford F-250 With An 8' Bed

Question

Question:

I need the rear mounts for a F250 2019 8 foot bed all factory no extra additives. Can you send me the part number for the one that will fit my Ford. The front mount I got worked wonderful and now I need the rears for a different reason. LoL

asked by: Ronald B

0

Expert Reply:

Hi Ronald,

For a 2019 Ford F-250 with an 8' bed you would need the TorkLift Camper Tie-Downs # TLF3008 for steel or the TorkLift Talon Camper Tie-Downs # TLF3008A if you're wanting their aluminum version.

If you don't have the turnbuckles or yours are in need of replacement then you can go with the TorkLift Locking FastGun Turnbuckles # TLS9522-2-LK.

expert reply by: Kevin C

0

Answer 1

Hi Ronald, For a 2019 Ford F-250 with an 8' bed you would need the TorkLift Camper Tie-Downs #TLF3008 for steel or the TorkLift Talon Camper Tie-Downs #TLF3008A if you're wanting their aluminum version. If you don't have the…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 10

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 11

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 12

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Rear Frame-Mounted Camper Tie-Downs For A 2019 Ford F-250 With An 8' Bed

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching