Will The Curt Class III Receiver Allow For 60LB Bike With Kuat NV 2.0 Bike Rack 2020 Tesla Model 3?
Question:
I have a 2020 Tesla M3 with a Curt Class I hitch from you guys! on it. I recently acquired an electric bike which is considerably heavier. Ive been reading warnings that the heavier bike plus the rack acting as a lever is _effectively_ much more than a tongue weight of 300lbs. Adding to my confusion, I dont see much difference between the Curt Class I and the Curt Class III other than the 1.25inch vs. 2inch receiver. I would have expected the Class III to also fasten to the cars frame/body or at least more than just bolt on to the bumper. So... Is the Curt Class III up to the job of hauling a 60lb e-bike plus a 20ish lb regular bike? Id likely be using a Küat NV2.0 rack.
asked by: Byron W
Expert Reply:
Yes, the Curt Class III Receiver # C45FR is going to be up to the job of carrying your 60lb and 20lb bike with the Kuat NV 2.0 Bike Rack # NV22G behind your 2020 Tesla Model 3. I definitely understand your concern over the mounting Byron but you must understand most cars use a unibody frame so the bumper mounting position this receiver uses is actually stronger.
As far as the construction it does appear the only difference of the construction is the 1-1/4" versus the 2" receiver openings. Do understand we do not have all the specification details from Curt to understand if they oversize the material needed for the 1-1/4" or if they use thicker steel on the 2" version. We do know for the receiver portion itself the 2" receiver is stronger than the class I.
![Bud M](https://images.etrailer.com/static/images/catg/people/2449_tn.jpg)
Products Referenced in This Question
Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 3
- Fits 2 Inch Hitch
- Carbon Fiber Bikes
- Electric Bikes
- Heavy Bikes
- Kuat
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 300 lbs TW
- 2000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt 4-Way Flat Trailer Connector with Circuit Protected Powered Tail Light Converter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Required Fascia Cutting When Installing EcoHitch Trailer Hitch on 2020 Tesla Model 3
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How Does Brake Controller Install 2020 Chevy Equinox with Tow Package
- Q&A: Comparing Hidden Hitches that Fit 2022 Tesla Model 3
- Q&A: Rear Bumper for 1993 Jeep YJ with Curt Hitch Already Installed
- Q&A: What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer Suspension
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Fender for a Harbor Freight Folding Trailer with 4.80x12 Tires
- Article: Trailer Maintenance Schedule
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Best Bike Racks for Electric Bikes
- Article: Which Hitches are Made in the USA