Correct Demco Autoslide for 2024 GMC Sierra 2500

Question

Question:

I have a 2024 GMC 2500. I am interested in purchasing this hitch for a new 5th wheel. I have the OEM puck system already in the bed. Do I need to purchase the rails or do I just install this unit? If I need the rails, which rails do I purchase? Thank you.

asked by: Josh K

0

Expert Reply:

The # DM8550034 is designed to fit industry standard rails so as is it will not fit your 2024 GMC Sierra 2500. You could get an adapter to add rails but that isn't necessary. What you need is the Demco Autoslide # DM79GV which comes with the Chevrolet/GMC OEM adapter plates. This will allow you to install it directly into your puck system.

expert reply by: Robin H

0

Answer 1

With the GVWR of your 2024 Brinkley MODEL Z 3100 5th wheel being 14,995lbs the MORryde Cushioned 5th Wheel Pin Box for 18K to 21K Trailers w/ Lippert Rhino #MR55QR would be a compatible fit, but give you a bad ride quality because the shear spring is…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

For any truck with a bed that is less than 8 feet long you are definitely going to want a sliding 5th wheel hitch as opposed to a fixed hitch, and for this there is one hitch that meets your needs perfectly - the Demco Hijacker Autoslide. This is the…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

Hi David, Rock Tamers require an inch of space on the ball mount shank in order to mount. If the portion of the shank exposed where you'll be installing the Rock Tamers is 2" x 2" then you'll want #ERT00108, for 2.5" x…

view full answer...

Answer 7

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 10

Hi Robert, To install your Putco Blade LED Tailgate Light Bar #P22KR you'll need to just remove the tail lights so that you can get access to the back wiring in the back of them. The plug-and-play connectors on the wire harness with have a male…

view full answer...

Answer 11

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...