What Bolts Are Needed For MORryde Suspension Kit For Correct Track
Question:
Followup question about the MR58ZR. I have a 2013 Dutchmen Infinity with tandem 7000 lb Lippert axles, with factory Equaflex Trailair equalizer. Has stock 2-1/4 inch shackles. Currently, all 14 shoulder bolts are 2.9 inch working length from end of bolt to underside of head. I intend to install your 3rd Generation Correct Track RR23QX, and heavy duty shackles. Because the new shackles are 1/2 inch thick, it makes sense to me that the 8 of the replacement shoulder bolts would be about 1/2 inch longer or 3-3/8. But what is unclear to me is the needed length of the other 6 shoulder bolts. If the Correct Track plates are 1/4 inch steel, then it seems those bolts would also need to be the 3-3/8. The instructions are unclear, but I think the alignment correction plate takes up the 1/4 inch slop to achieve the proper fit around the leaf eyes. After installing the Correct Track hanger extensions on all three pillars with that included hardware, it appears to me that all 14 shoulder bolts would need to be 3-3/8 inch long. However, the MR58ZR has two shorter bolts that are 2-7/8. My guess is that perhaps earlier generations of Correct Track had a different solution. Is there a different kit available with all 14 bolts 3-3/8, or can you include the correct length bolt? Or am I misunderstanding something?
asked by: Mike V
Expert Reply:
Hey Mike; first, thanks for all that detailed info, and second, everything you said was 100% correct so you aren't missing a thing. You do indeed need two longer bolts with the third generation Correct Track # RR23QX.
The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps # MR58ZR comes with twelve 3-3/8" long bolts and two 2-7/8" long bolts when they should all be 3-3/8" long.
Your explanation about the previous Correct Track generation seems to be spot on, so I don't know why MORryde has this for the current version of Correct Track. Unfortunately they don't offer a whole kit with all 3-3/8" bolts, but they are offered individually if you want to go that route with a replacement 9/16" x 3-3/8" bolt (the same size as the MORryde) from Lippert, part # LC126197.
Products Referenced in This Question
Replacement Wet Shoulder Bolt - Equa-Flex Tandem Axle Suspension - 9/16" x 3-3/8" - Qty 1
- Trailer Leaf Spring Suspension
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 3-3/8 Inch Long
- Lippert
more information >
MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Trailer Leaf Spring Suspension
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- 2-1/4 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- RV Ride Control
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 3-1/8" Shackle Straps
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Video: MORryde ALLTREK 4000 Shock Absorbing Equalizers Installation - 2020 Keystone Montana Fifth Wheel
- Video: Review of RV Ride Control Trailer Leaf Spring Suspension - Alignment and Lift Kits - RR23QX
- Video: Review of ABS Fasteners 9/16 Inch Shackle Bolt Locknut - TRFA916DLNZ
- Video: MORryde ALLTREK 4000 Tandem Axle Trailers Shock Absorbing Equalizers Review
- Video: Review of MORryde Trailer Leaf Spring Suspension - Equalizers - MR27ZR
- Video: MORryde Tandem Axle Trailer Rubber Equalizers Installation - 2009 Keystone Montana Mountaineer Fifth
- Q&A: Cushioned Equalizer Recommendation for Trailer with 33 inch Wheelbase
- Video: ABS Fasteners Trailer Shackle Bolt Locknut Review
- Q&A: Determining Which MORryde Shackle Upgrade Kit Fits 2018 Highland Ridge TT W/ Correct Track
- Q&A: Parts Needed To Raise 2021 Grand Design Imagine 2970RL And Add Wet Bolt Suspension
- Q&A: Correct Orientation of MORryde ALLTREK 4000 Shock Absorbing Equalizers
- Shop: Locknut for Trailer Shackle Bolt - 9/16" Diameter
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: morryde x brace
- Search Results: suspension equalizer
- Shop: Stromberg Carlson Adjustable Accessory Hitch Receiver - 49-1/2" to 76-1/2" Wide - 2"
- Shop: MORryde Rubber Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Search Results: fifth wheel lift kit
- Article: Double-Eye Trailer Suspension System Review
- Search Results: equalizer
- Q&A: Lift Kit Solution to Allow Fifth Wheel Trailer to Sit More Level When Towed
- Shop: Suspension Enhancement
- Q&A: How To Measure To Make Sure The MORryde CRE3000 Equalizers Will Fit Your Trailer
- Search Results: morryde
- Shop: Trailer Hitch
- Article: How to Raise Your Travel Trailer Height
- Q&A: Lift Kit Options For A 2015 Winnebago Micro Minnie 1706FB