Which is Best MORryde Rubber Equalizer For Up 8,000 lb Axles

Question

Question:

Hi. If the SRE4000 is more robust, why is the CRE3000 rated up to 8K axel but the 4000 only goes to 7k axels? Trying to figure out how to choose between them…… Thanks

asked by: Carrie H

0

Expert Reply:

The SRE4000 isn't more robust; definitely go with the CRE3000 which is the 8,000 lb rated MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase # MR27ZR.

For mounting, depending on your strap length you need MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps # MR76ZR or 2-1/4" Long Shackle Straps # MR46ZR.

expert reply by: Kyle S

0

Answer 1

Hi Carrie, I can help you determine the right replacement double-eye leaf springs for your Grand Design Imagine trailer. It's pretty easy to figure out, as all you need to do is measure your current leaf springs from center-to-center of the…

view full answer...

Answer 2

The MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR will work fine, but you'd want to measure your current shackle straps to make sure. These straps measure 3 1/8" long so as long as that matches what you have…

view full answer...

Answer 3

Daniel, you can add a third axle but you're going to want to keep all of your axles the same size. So if you wanted 6K axles instead of 5.2K then you'd want to swap the other two as well. With that said, to add your third axle you're…

view full answer...

Answer 4

Hi there Andy; thanks for that info, and while we don't have 3,500 lb axles that are 86-1/2 inches long, we do have a 5,200 lb option with the Dexter Trailer Axle Beam #8327816. The spring center you mention is an odd one, as the #8327816 has…

view full answer...

Answer 5

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

view full answer...

Answer 6

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Thanks for all of the information, Robert! It sounds like you have the Tandem-Axle Trailer Hangers #H248 installed on your tandem axle trailer so to get your Dexter Trailer Axle w/ Electric Brakes #7359765-EB installed you need the following parts: -…

view full answer...