Distance Between Axles When Using Dexter Equalizer Kit # K71-359-00

Question

Question:

I’m looking for the correct distance between two 7000 lbs axles I want to get this right. Double eye bolt spring Thanks

asked by: Ryan

0

Expert Reply:

If you used the Dexter Equalizer kit part # K71-359-00 that you referenced the distance between the axles would be 33 inches.

expert reply by: Jameson C

0

Answer 1

Although the equalizers included with the Dexter #K71-359-00 Heavy Duty Suspension are a 1/2 inch taller and a 1/4 inch different in width than the original equalizers, that difference isn't enough to affect the fit. The trailer height will…

view full answer...

Answer 2

There are two different MORryde Suspension Upgrade Kits for trailers with a Correct Track Trailer Alignment and Lift Kit, part #MR58ZR for 2-1/4" or part #MR98ZR for 3-1/8". You'll need to measure your shackle straps and go…

view full answer...

Answer 3

For a Dexter EZ Lube Spindle 5,200 lb capacity part #8-201-9UC3-EZ the bearings needed are #25580 and #15123. We have a bearing kit that has these as well plus the races and a new seal #BK3-110.

view full answer...

Answer 4

To improve your trailers rough ride and absorb road shock I would start by replacing your trailers equalizers with a shock absorbing equalizer system. The Equa-Flex Cushioned Equalizers part #LC279687 is designed for tandem axle trailers with…

view full answer...

Answer 5

The Dexter Axle Heavy-Duty Suspension Kit, Item #K71-359-00, is meant to be a hardware kit for tandem axle trailers like your Coachmen that have 1-3/4 inch double eye springs. The kit includes: 02 Equalizers 14 Flange Nuts 02 Shoulder Bolts 04 Wet…

view full answer...

Answer 6

The MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track comes in two different lengths, part #MR58ZR for 2-1/4" or part #MR98ZR for 3-1/8". Please note, the above are for models with the Correct Track system. For…

view full answer...

Answer 7

While the shackle straps of the MORryde HD Shackle Upgrade Kit part #MR58ZR are 1/4 inch shorter than the 2-1/2 inch long ones you have now this still work well. The slight length difference won't really affect anything. Your current equalizers…

view full answer...

Answer 8

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs #K71-359-00 you were looking at measures 5-3/4" center to center of the horizontal mounting holes, and includes new heavy duty 2-1/4"…

view full answer...

Answer 9

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 10

Yes, it is possible. You will need to know the dimensions of your wet bolts, the inner and outer dimensions of the bushings, and the shackle strap dimensions, and the bolt hole diameter. Once you have this information you can find the correct part in…

view full answer...

Answer 11

I am happy to help! Starting with the two holes in the shorter hangers included in the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center #APT8 you were looking at. Those holes are not for bolting but…

view full answer...

Answer 12

Thanks for providing a photograph of your trailer axle sticker. I was able to speak with my contact at Dexter Axle and find out the bearing sizes. You need the etrailer #BK3-300 Bearing Kit. This will get you bearings, seals, and races. At this very…

view full answer...

Distance Between Axles When Using Dexter Equalizer Kit # K71-359-00

Product Page this Question was Asked From

Continue Researching