Can I Use Dexter Components on Lippert Axles and Vice Versa?
Question:
i see where the smaller axle componets interchange between dexter and lippert axles. What about the larger 10k and above?
asked by: Ginger L
Expert Reply:
You're not going to have any problems mixing Dexter and Lippert components on trailer axles over 10k-lbs in the same manner as below 10k-lbs as long as the measurements on the replacement parts are the same- i.e. bearing sizes are the same, etc.. This happens quite often in our shop repairs where we'll use Dexter Brakes like the # 23-408-409 on a Lippert Axle.
When doing this, as mentioned above, you will want to make sure that you're using the correct capacity components with parts that match their applications- like using hubs with bearings that match the spindles on the axle, but as long as this is matched, you will be able to use the two companies' components interchangeably.
Product Page this Question was Asked From
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 12K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 5 Inch Drum
- 12000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Shop: Trailer Hub Wheel Stud, Drive-In, 9/16" x 2-1/2" - Qty 1
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Draw-Tite Ball Mount w/ 2" Ball for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 12K
- Shop: 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long
- Search Results: trailer hitch ball mount
- Search Results: timbren 7000 axle less
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Shop: Replacement Trailer Hub Bearing - 25580
- Search Results: 25980
- Search Results: 2598
- Search Results: hitch ball
- Search Results: reducer sleeve
- Search Results: draw tite
- Shop: Fifth Wheel Hitch
- Q&A: Will Dexter Brake Assemblies Fit on a Lippert Axle
- Video: JT's Strong Arm Jack Stabilizer Kit T-Handles Replacement Review
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Double Eye Leaf Spring For 6,000 Pound Axle on 5th Wheel Trailer
- Video: Review of etrailer 6 Leaf Double Eye Spring - e94SR
- Q&A: Comparing Dexter and etrailer Brand Electric Trailer Brakes for 10K Axles
- Q&A: Replacement Bearings, Races, Seals, and Brakes For a Dexter D35 and D44 Axle
- Shop: Trailer Wiring
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Video: Review of Demco Trailer Brakes - DM5643
- Video: Demco Hydraulic Brake Line Kit Installation