Lock For 3" Wide Coupler

Question

Question:

Want to make sure coupler lock right for my coupler ? The current coupler lock pin is 3 3/8 long the coupler is 3 wide. I am looking at the bulldog lock

asked by: Litch

0

Expert Reply:

Hey Litch, yes the Bulldog Easy Access Coupler Lock - Swivel Head - Chrome # BD580409 is exactly what you'd want for a 3" wide coupler.

expert reply by: Andrew N

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Oh it won't stand up well to an angle grinder at all. The Trimax Heavy Duty Adjustable Wheel Lock item #TMX42ZR is designed to stop the casual thief with bolt cutters. Not a dedicated criminal with power tools. I am sorry but I do not have…

view full answer...

Answer 4

Thanks for reaching out, Tripp! To get multiple locks keyed alike that are compatible with the Demco EZ-Latch you'll need to go with our etrailer Surge Brake Coupler Lock #e98888 - just be sure to choose the "keyed alike"…

view full answer...

Answer 5

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a…

view full answer...

Answer 6

Thanks for your pictures! That's what Wranglers are meant for. At 4500 pounds, the weight of the secured cargo would exceed the combined safe working load limit of 1,100lbs per tire of the straps being used on the Erickson E-Track Tie-Down…

view full answer...

Answer 7

To be able to lock the latch on the Demco Trailer Coupler - Adjustable Channel Mount #DM14976-52 you were looking at I recommend the Bulldog Easy Access Coupler Lock #BD580409.

view full answer...

Answer 8

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

view full answer...

Answer 9

It sounds like you have a Collar-Lok coupler such as #BD028244. For that type of coupler you could use lock #BLTL-23. The body is aluminum but the pin inside that goes way up into the coupler is steel. It fits 2-5/16 inch Collar-Lok couplers. For 2…

view full answer...

Answer 10

For a longer version of the hitch lock that comes with the part #BD580404 you would want the part #BD580402 as it has a 2-1/2 inch span. For the matching trigger latch lock as well you would want the part #BD580403.

view full answer...

Answer 11

The male thread of the Replacement Adapter Fitting #T4871700 being longer would not be an issue when installing it in the back of the Dexter actuator part #K71-650. Pressure from the male side flare fitting to the actuator is what seals it so the…

view full answer...

Lock For 3" Wide Coupler

Product Page this Question was Asked From

Continue Researching