Will the Trimax Heavy Duty Adjustable Wheel Lock Stop an Angle Grinder?

Question

Question:

Hello I like to know how the wheel boot prevents an diamond wheel angle grinder? Thank you

asked by: Maurice K

0

Expert Reply:

Oh it won't stand up well to an angle grinder at all. The Trimax Heavy Duty Adjustable Wheel Lock item # TMX42ZR is designed to stop the casual thief with bolt cutters. Not a dedicated criminal with power tools.

I am sorry but I do not have another option for you. We do not carry that heavy duty of a wheel lock.

expert reply by: Jerred H

0

Answer 1

I recommend the Trimax Heavy Duty Adjustable Wheel Lock #TMX42ZR with the Detail K2 Mighty Multi Utility Trailer #K2MMT4X6. This wheel lock has a cover to protect against removal of the wheel and tire when installed on the trailer.

view full answer...

Answer 2

Yes, the Westin MAX Winch Mounting Tray #46-23755 will fit your 2021 Ram 1500 Classic just fine. Westin lists this out separately on their site but it's the same winch mount used in the full Westin HDX Winch Mount Grille Guard with Punch…

view full answer...

Answer 3

In order to keep a trailer from rolling on a slight incline, what you will need are wheel chocks. You will simply put them behind your trailer tires and that will prevent the trailer from rolling away from you. You'll want to get wheel…

view full answer...

Answer 4

Yes, the Trimax Heavy Duty Adjustable Wheel Lock #TMX42ZR will indeed fit a 15" wheel with a 31x10.50R15 tire. We have records of this lock fitting tires a good bit larger than yours, so a 31" diameter tire is well within parameters…

view full answer...

Answer 5

You will be able to use the Trimax Heavy Duty Adjustable Wheel Lock with Padlock #TMX42ZR on your vehicle/trailer. It won't have any issues fitting your LT265/75R16 tires with 16" wheels.

view full answer...

Answer 6

If the Trimax Heavy Duty Wheel Lock #TMX42ZR has been sitting outside for a long time, take some penetrating oil and spray quite a bit on the pin. Chances are the pin and lock have slightly corroded together over time. I'd spray it down a…

view full answer...

Answer 7

The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a…

view full answer...

Answer 8

Oh it won't stand up well to an angle grinder at all. The Trimax Heavy Duty Adjustable Wheel Lock item #TMX42ZR is designed to stop the casual thief with bolt cutters. Not a dedicated criminal with power tools. I am sorry but I do not have…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The 10 to 18 inch measurement is referring to the wheel/rim only - not the whole tire - for the Trimax wheel lock, which is the following part number: - Trimax Heavy Duty Adjustable Wheel Lock with Padlock - 10" to 18" Wheels…

view full answer...

Answer 11

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Will the Trimax Heavy Duty Adjustable Wheel Lock Stop an Angle Grinder?

Product Page this Question was Asked From

Continue Researching