Which MORryde X-Factor Crossmember Fits MORryde CRE 3000

Question

Question:

Does the x factor member also work on the CRE 3000 ?

asked by: Jeff C

0

Expert Reply:

We do have a MORryde X-Factor Crossmember that is compatible with the CRE. However, the # MR99ZR you were looking at only works with the LRE, RE, or TRE suspension systems. What you need instead is the # MR33WR. This is compatible with CRE, SRE, or stock suspension systems.

expert reply by: Robin H

0

Answer 1

Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…

view full answer...

Answer 2

Thank you for the photo and information! Your Road Armor Shock Absorbing Equalizer Kit #LC696740 uses standard 9/16" suspension bolts that can definitely be upgraded to wet bolts. For your application we have the Wet Equalizer Bolt #126B2 which…

view full answer...

Answer 3

You will need the Road Armor Shock Absorbing Equalizer Kit #LC696740 for your 2022 Grand Design Imagine XLS 22MLE. This will need to be paired with their Tandem Axle Road Armor Wet Bolts and Shackles #LC52SV. I recommend using the LubriMatic LMX…

view full answer...

Answer 4

Let's go ahead and start with the replacement for your #TREQ310 equalizer. This equalizer measures 6" center to center of the bolt holes and 4" tall, and the best option for an upgrade is one with the same 6" measurement. For that…

view full answer...

Answer 5

MORryde does have a suspension upgrade kit that I highly recommend. It comes with 1/2" thick shackles, along with wet bolts and bronze bushings. You will want to choose a kit based on the length of your current shackles. For 2-1/4" you need…

view full answer...

Answer 6

Since your equalizer is larger than the 6" that the Road Armor Shock Absorbing Equalizer Kit #LC696740 requires I have another recommendation for you. The Dexter E-Z Flex Suspension Kit #K71-653-00 will upgrade the equalizer on your 2019 Forest…

view full answer...

Answer 7

Yes you can just use one MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR with your 2021 Jayco Jay Feather 25RB, however for full support a tandem axle trailer will need to utilize 3. Attached is a product overview…

view full answer...

Answer 8

The three things you'll need to know to choose the correct cushioned equalizers is the axle capacity, the center hole to center hole length of the equalizers you currently have and the height of the equalizers. For example, the Lippert #LC696740…

view full answer...

Answer 9

I do have some direct equalizer upgrade options for you, but the Road Armor Shock Absorbing Equalizer Kit #LC696740 won't work unless you get longer shackle straps, but even then if you already have 3-1/8" long shackles you won't be able…

view full answer...

Answer 10

With the recent addition of the MORryde AllTrek 4000 Equalizers #MR29DR I feel these are now the best option. These equalizers provide up to 4" of travel with axles up to 8,000lbs. Be sure to pair this with one of the shackle kits listed below.…

view full answer...

Answer 11

A Dexter 3,500LB Axle #7359765 is going to also have a 2-3/8" diameter axle tube like your Dexter 3,000lb axle. This will require you to have different hubs as the 3,500lb axle is going to have a larger spindle. If the axle you are replacing has…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...