bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Replacement Leaf Springs and Shackles for 2014 Evergreen Amped 28FS Toy Hauler  

Question:

Thanks Robin,I found the axle rating and have enclosed a picture. There are 2 of these on my hauler. My shackles are 2 1/4 and my leaf springs measure 26" center to center. I think the axle tube is saying 6000# but was hoping you could verify. Also going to need an equalizer too. Has a worn out equaflex on it now. Thanks!

0

Expert Reply:

MORryde does have a suspension upgrade kit that I highly recommend. It comes with 1/2" thick shackles, along with wet bolts and bronze bushings. You will want to choose a kit based on the length of your current shackles. For 2-1/4" you need the # MR46ZR and for 3-1/8" the # MR76ZR.

For replacement leaf springs you will need to know your axle capacity along with your spring eye to spring eye measurement. Your current leaf springs will be slightly elongated since they flatten over time so you will need to take that into account.

For example, if you have a 3,500 lb axle and your measurement is 27" you could use the # e97SR as a replacement. It is also worth noting that the leaf count doesn't matter. You only need to worry about the capacity.

I have attached a link to all of our leaf springs which can be filtered by axle capacity and length. I also included some installation videos for your reference.

expert reply by:
0
Robin H
6,000 Pound Lippert Axle Tag.
6,000 Pound Lippert Axle Tag.
(click to enlarge)

Brent

9/26/2022

Thanks Robin,I found the axle rating and have enclosed a picture. There are 2 of these on my hauler. My shackles are 2 1/4 and my leaf springs measure 26" center to center. I think the axle tube is saying 6000# but was hoping you could verify. Also going to need an equalizer too. Has a worn out equaflex on it now. Thanks!

Reply

Robin H.

9/26/2022

That is correct, you have 6,000 lb Lippert axles. For leaf springs that match your measurement and axle capacity you can use the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 26" Long # e94SR. The # MR46ZR will be the correct shackle kit. For a replacement for the Equa-Flex I would get another Equa-Flex. You will want to measure again to match what you have since both models are rated for 6k axles. The # LC279688 is 7-1/2" wide (distance from center of left-most eye to center of right-most eye) and 4" tall (height from center of bottom hole to center of top hole). The # LC279687 is 5-1/2" wide and 2-1/2" tall.
Reply
Ask The Experts a Question >>

Products Referenced in This Question







Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for LC279688Instructions for RM-2460

Miscellaneous Media

Trailer Leaf Spring Suspension Leaf Springs Double Eye Springs
Double-Eye-Trailer-Suspension-Review
Double-Eye Trailer Suspension System Review
Review of etrailer 4 Leaf Double Eye Spring - e97SR
Review of etrailer 4 Leaf Double Eye Spring - e97SR - Video
MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2018 Shasta Phoenix Fifth Wheel
MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2018 Shasta Phoenix Fifth Wheel - Video
MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer
MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer - Video
etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>