Replacement Glass Top Solution for Furrion RV Range Oven part # FGR21G3A2-BG

Question

Question:

I need a replacement glass top for my BLACKinch FGR21G3A2-BG Furrion 2-in-1 RV Gas Range Oven. Can you provide p/n, price and availability if in stock? Thank you

asked by: Richard K

0

Expert Reply:

The correct replacement glass top solution for your black FGR21G3A2-BG would be the part # FR46NR.

expert reply by: Jameson C

0

Answer 1

The Replacement Black Top with Glass Cover for Furrion 2-in-1 Range Oven #FR46NR measures 21-3/8" left to right and 19-1/4" front to back. The dimensions are not listed since this is a replacement part for specific Furrion range…

view full answer...

Answer 2

When you replace the glass top part #C-FSRE21SA-SS-003 on a Furrion 2-in-1 Range Oven like part #FSRE21SABL you are replacing the whole top of the oven not just the glass portion. You will lift the old top upwards until it releases from the oven.…

view full answer...

Answer 3

While we do not have a direct replacement for your Magic Chef, the: -Replacement Stainless Steel Top with Glass Cover for Furrion 2-in-1 Range Oven #C-FSRE21SA-SS-003, May work out great for you, and has really similar dimensions as your Magic Chef…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 8

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 9

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

view full answer...