Will the Curt Trailer Hitch for a 2024 Mazda CX-90 Fit the PHEV Model

Question

Question:

will the trailer hitch listed for 2024 Mazda cx-90 also fit 2024 mazda cx-90 PHEV Hybrid

asked by: John C

0

Expert Reply:

John, the Curt Trailer Hitch Receiver # C25FV will fit all of the models of the 2024 Mazda CX-90, including the PHEV.

expert reply by: Bryce D

0

John

2/15/2024

Thank You Dose That Also Include Wire Harness Kit

Reply

Bryce D.

2/22/2024

@John No it does not, you're also going to need # C24ZV.

Reply

Answer 1

It looks quite good, in my opinion; I have gone ahead and added a photo for you of a 2024 Mazda CX-90 so you can see what yours will look like after the installation of the Curt Trailer Hitch Receiver #C25FV. The #C25FV has a concealed crosstube so…

view full answer...

Answer 2

You're in luck because we do! To add a hitch to your 2024 Mazda CX-90, I recommend the Curt item #C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2". It has a 5,000 lbs…

view full answer...

Answer 3

There is no cutting required to install the Curt Hitch item #C25FV on your 2024 Mazda CX-90. There is a small panel beneath your bumper cover that you will remove and not reinstall that will give you clearance for the 2" receiver. If you…

view full answer...

Answer 4

Since the Curt 4-way kit part #C24ZV plugs into the factory trailer wiring port it would put the vehicle into trailer mode when towing a trailer like you are wanting it to.

view full answer...

Answer 5

While we have not had a 2024 Mazda CX-90 PHEV in our shop with the hands free liftgate to test the exact function I can say most applications will not eliminate the use of the kick sensor. I installed our receiver on my Acura RDX which takes up a lot…

view full answer...

Answer 6

The Curt #C59236 wiring you've found for your 2024 Mazda CX-90 is a universal wiring kit that essentially fits any vehicle on the market since it requires splicing into the OEM wiring of the vehicle for the installation. The Curt 56494, which is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Will the Curt Trailer Hitch for a 2024 Mazda CX-90 Fit the PHEV Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching