Which Roadmaster Comfort Ride System for 2019 Reflection 303RLS

Question

Question:

Which slipper spring kit with shocks do I need for my 2019 Reflection 303rls? I have Dexter 5200lb axles . Thx

asked by: Eddie L

0

Expert Reply:

Since your 2019 Reflection 303RLS has Dexter 5,200 lb axles on it the correct Roadmaster Comfort Ride kit you'd want is the part # RM-2460-2570 which is rated for 7k axles. This fits 3 inch diameter axles like what you have and would do a great job making the ride quality a lot smoother.

expert reply by: Jameson C

0

Answer 1

Yes, you can still install the Roadmaster Comfort Ride Leaf Spring Suspension Kit even though the trailer rides slightly nose high when coupled to the tow vehicle. When installing one of these kits you'll most likely need to get longer…

view full answer...

Answer 2

For a 6K axle you can use the CE Smith U-Bolt Kit for Mounting 5.2K to 7K, Round Trailer Axles #CE23003. We don't currently offer a four leaf trailer leaf spring with a 6K capacity and 26" eye-to-eye measurement, but we do offer the…

view full answer...

Answer 3

Your 2023 Grand Design Reflection 298BH has 3" axles that are either 5,200 lbs or 6,000 lbs capacity. The correct suspension system for it will be the Roadmaster Comfort Ride Leaf Spring Suspension Kit item #RM-2460-2570 you were looking at.…

view full answer...

Answer 4

The etrailer leaf spring part #e27SR is the correct capacity and length to work on your 2020 Grand Design Reflection 240RL. It having a couple more leaf's would not be an issue at all either. Since the height would be slightly different you would…

view full answer...

Answer 5

What you're looking for is an 86-1/2" long replacement axle. Since you will need new hubs and drums, along with brakes, I recommend getting the #8327816-EB. This has a 71-1/2" spring center length so you will also need to cut off the…

view full answer...

Answer 6

Yes, the brackets that come with Roadmaster Comfort Ride Leaf Spring Suspension 3" Axles Kit #RM-2460-2570 accept the 9/16" U-bolt that you currently have on your 3" axles. Drilling the bolt holes to make them larger could compromise…

view full answer...

Answer 7

The torque specs for a 1/2" trailer suspension u-bolt like the CE Smith U-Bolt Kit part #CE23003 is between 45 ft/lbs - 70 ft/lbs.

view full answer...

Answer 8

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 9

Since your 2019 Reflection 303RLS has Dexter 5,200 lb axles on it the correct Roadmaster Comfort Ride kit you'd want is the part #RM-2460-2570 which is rated for 7k axles. This fits 3 inch diameter axles like what you have and would do a great…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 12

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...