B&W Tow & Stow 2-Ball Mount Compatible With Multi Pro Tailgate on a 2023 GMC Sierra 1500

Question

Question:

Do the # BWTS10035B work with the GMC Sierra multi Pro tailgate? Meaning, will the tailgate hit the hitch when stowed?

asked by: Mark S

0

Expert Reply:

You need the B&W Tow & Stow 2-Ball Mount # BW29FR since you have the Multi Pro tailgate on your 2023 GMC Sierra 1500. This will clear the tailgate when the hitch ball is flipped into the stow position unlike the Mount # BWTS10038B you found.

We do have the 2" Hitch Cap Sensor # C57VV you can add to your sierra if you use a standard ball mount or the system you found. This will prevent that portion of the tailgate from opening when a ball mount is inserted into the receiver.

expert reply by: Bud M

0

Answer 1

The B&W Silencer Pad #BWTS35020 is intended to be placed on the shank of one of their Tow & Stow Multi-Ball Mounts like #BWTS10048B so that it acts like a gasket between the collar on the end of the hitch's receiver tube and…

view full answer...

Answer 2

Yes, there is another option to add a brake controller to your Sierra. Since you have the factory tow package, I recommend the Curt Echo In-Line Wireless Brake Controller item #C79DR. The controller plugs in behind your 7-way with included…

view full answer...

Answer 3

The Gen-Y Iron Grip Anti-Rattle Hitch Pin item #GY39FR will work out great with the B&W Tow & Stow item #BW29FR you were looking at. This can be used with any 2" ball mount or accessory. This is the only anti-rattle device we have that…

view full answer...

Answer 4

Yes, the Curt Spectrum Trailer Brake Controller #C51170 will work on your 2023 GMC Sierra 1500. You will need the Curt Custom Wiring Adapter #C51525 to connect to the factory connecter under the dash on your Sierra.

view full answer...

Answer 5

Yes, we have the B&W Tow & Stow 2-Ball Mount #BW29FR that is capable of a 4-1/2" drop. This fits your 2" receiver like the B&W Tow & Stow 2-Ball Mount #BW44FR you found and will allow you to use it with your MultiPro…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Thanks for the picture! For your 2023 GMC Sierra 1500 with adaptive ride control you'll want the Air Lift LoadLifter 5000 Air Helper Springs item #AL57388. This air bags have a 5,000 lbs load leveling capacity that will keep the rear end of your…

view full answer...

Answer 9

Hello Steve. I do have a good solution for you, but I cannot recommend using the Malone Adapter #MPG544. Since it is rated for towing only 4,000 lbs, your 8,000 lb towed vehicle would be double the max towing capacity. You are right about there being…

view full answer...

Answer 10

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

In order to install Rhino-Rack HD bars on your 2023 GMC Sierra 1500 you'll need the following parts: - 59" HD Crossbars #RB1500B-2 - 2500 Series Legs for HD Bars #RRRLKHD - DK Fit Kit #DK427 I'm not 100% sure what multi-purpose holders…

view full answer...