How Much Does The BAKFlip MX4 Hard Tonneau Cover BAK48120 Weigh?

Question

Question:

How much does the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish BAK48120 weigh?

asked by: Greg S

0

Expert Reply:

The BAKFlip MX4 Hard Tonneau Cover # BAK48120 weighs in at 70 pounds.

expert reply by: Lazer S

0

Answer 1

The BAK Revolver X4s Hard Tonneau Cover item #BAK62VR with all components weighs 75 lbs. The shipping weight is just over 80 lbs. This cover is confirmed to fit the 5-3/4' beds of the 2023 Chevy Silverado 1500.

view full answer...

Answer 2

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 3

My contact at Yates Rubber advises that a nominal 8-inch keel roller does not measure exactly 8 inches; typically they are slightly smaller than the specified size, much the way a piece of 2 x 4 lumber is not exactly 2-inches by 4-inches. I took…

view full answer...

Answer 4

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 5

I looked up pictures of the taillights that are on the 3110 Featherlite trailers and for the LED version of them you would want the part #STL36RB and #STL37RB. It looks like the spare tire mounts for your trailer are something you would have to get…

view full answer...

Answer 6

We do offer the Trailer Connector Adapter, #HM47425, which converts a 7-pole round connector to a 7-pole flat connector. This adapter works for tow vehicles with combined taillight wiring, meaning that the turn signals and brake lights run on the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The Kenda Karrier ST205/75R14 Radial Trailer Tire #AM10235 (Load Range D) and the Kenda Karrier ST215/75R14 #AM10229 (Load Range C) that you referenced are simply different tire sizes. The ST215/75R14 tire size is larger in diameter/height by just…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

I think you might be talking about diameter but yes, a 215/75-14 trailer tire will have a slightly larger circumference than a 205/75-14 tire. Specifically, the 205 will have a circumference of about 82.582 inches whereas the 2015 will have a…

view full answer...

Answer 11

For your 14 inch wheels, I recommend the Provider ST215/75R14 Radial Trailer Tire - Load Range D #TTWTRTM2157514D. This is a slightly smaller tire, but it is very well made. It is rated for 2,200 lbs at 65 psi and has a max speed rating of 81 mph. It…

view full answer...

Answer 12

Dexter hub #8-174-5UC3 uses the 5-spoke utility bolt pattern so it is uncommon just like the hub you have. If your existing hub uses inner bearing 25580 and outer bearing 15123 with a seal inner diameter of 2-1/8 inches then this hub is a likely fit.…

view full answer...