Does Draw-Tite Max-Frame Hitch Replace Bumper Beam on 2023 Tesla Model Y

Question

Question:

If I install this hitch will the bumper be removed? Does it replace it?

asked by: Tom

0

Expert Reply:

Yes, installation of the Draw-Tite Max-Frame # DT58MR will require removal of the rear bumper beam on your 2023 Model Y. The hitch bolts-on in place of the bumper beam, replacing it completely. You can hang onto or discard the bumper beam following the installation.

expert reply by: Robin H

0

Answer 1

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

view full answer...

Answer 2

Yes, it is. The EcoHitch Invisi Trailer Hitch item #EH39FR is custom fit and bolts to your 2023 Tesla Model Y with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue…

view full answer...

Answer 3

For your 2023 Tesla Model Y I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR.This is a custom fit Class III hitch with a 2" receiver. The hitch features a completely hidden design with the bumper panel in place, and comes with…

view full answer...

Answer 4

the biggest difference between the 20 x 59 Curt Cargo Carrier for 2" Hitches #C18150 and the 24x60 Curt Cargo Carrier for 2" Hitches #C18152 is the size of the carrier. The #C18150 carrier has outside measurements of 59-1/8" long x…

view full answer...

Answer 5

The Draw-Tite #DT58MR is fairly similar to the EcoHitch #EH39FR in many respects including the design and installation, but the EcoHitch #EH39FR is made from an alloy of recycled materials where the Draw-Tite is made from steel. Typically the draw of…

view full answer...

Answer 6

Unlike the EcoHitch #EH39FR the Draw-Tite #DT58MR will not require modification of the knockout panel on your 2022 Tesla Model Y. This is a Class III hitch with a 2" receiver just like the EcoHitch. It has a maximum gross trailer weight of 3,500…

view full answer...

Answer 7

The stock bumper beam/crash bar does not get put back on your 2021 Tesla Model Y when installing the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR. The bumper beam will remain off, which is indeed different than the installation of the EcoHitch…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...