Does Bumper Beam Get Puck Back on 2021 Tesla Model Y w/ Draw-Tite Hitch DT58MR

Question

Question:

stock crash bar. do you put it back on top of the hitch like eco hitch does?

asked by: Melvin

0

Expert Reply:

The stock bumper beam/crash bar does not get put back on your 2021 Tesla Model Y when installing the Draw-Tite Max-Frame Trailer Hitch Receiver # DT58MR.

The bumper beam will remain off, which is indeed different than the installation of the EcoHitch Invisi Trailer Hitch Receiver # EH39FR.

The Draw-Tite hitch essentially replaces the bumper beam, while the EcoHitch fits in behind the beam.

expert reply by: Kyle S

0

Answer 1

Yes, I was able to obtain the following photos of the #EH39FR EcoHitch for the 2020 Tesla Model Y.

view full answer...

Answer 2

The Draw-Tite #DT58MR is fairly similar to the EcoHitch #EH39FR in many respects including the design and installation, but the EcoHitch #EH39FR is made from an alloy of recycled materials where the Draw-Tite is made from steel. Typically the draw of…

view full answer...

Answer 3

Thank you for your purchase and for all of the info! The Draw-Tite Trailer Hitch #DT58MR is still an excellent choice for your 2021 Tesla Model Y and it allows you to replace that removeable fascia so you won't need a hitch cover. The only other…

view full answer...

Answer 4

I definitely have a recommendation for you to add both a trailer hitch receiver and wiring for your 2021 Tesla Model Y so you can haul your Wave Runner. The hitch I recommend is from Draw-Tite and the wiring harness from Tekonsha, with the correct…

view full answer...

Answer 5

The Draw Tite Hitch part #DT58MR that fits your 2022 Tesla Model Y does not void the warranty or affect the safety rating of the vehicle. The federal magnusson-moss warranty act protects you from a dealership who would try to void warranty based on a…

view full answer...

Answer 6

The EcoHitch #EH39FR for your 2022 Tesla Model Y does provide a much easier solution for removal of the appearance panel for access to the hitch opening compared to the Draw Tite #DT58MR. If you fast-forward to the 25 second mark of the attached…

view full answer...

Answer 7

The bumper beam on your 2023 Tesla Model Y being replaced by the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR should not affect your vehicle warranty. The design is similar to the factory receiver Tesla installs on their vehicle from the…

view full answer...

Answer 8

I reached out to Torklift (they make the EcoHitch) and the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH39FR is a confirmed fit for a 2020 Tesla Model Y. The only hitch I have been able to confirm is the EcoHitch.…

view full answer...

Answer 9

For your 2023 Tesla Model Y I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #DT58MR.This is a custom fit Class III hitch with a 2" receiver. The hitch features a completely hidden design with the bumper panel in place, and comes with…

view full answer...

Answer 10

I recommend installing the EcoHitch Trailer Hitch Receiver #EH39FR for your 2023 Tesla Model Y and here is why: Both the Draw-Tite #DT58MR and the EcoHitch #EH39FR install behind the bumper and have a really clean appearance, but the main difference…

view full answer...

Answer 11

The Draw Tite hitch part #DT58MR that you referenced does not have nylon washers that would go between the hitch and the vehicle to prevent galvanic corrosion. EcoHitch actually only recommends using the isolators if you are in the "rust…

view full answer...

Answer 12

Yes, it is. The EcoHitch Invisi Trailer Hitch item #EH39FR is custom fit and bolts to your 2023 Tesla Model Y with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue…

view full answer...

Does Bumper Beam Get Puck Back on 2021 Tesla Model Y w/ Draw-Tite Hitch DT58MR

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching