2020 Grand Design Imagine 2500RL Hub Bearing Kit With Grease Seals

Question

Question:

HI, I am looking for a hub bearing kit including the grease seals for my 2020 Grand Design 2500RL. The axles are Dexter 133183499025 and 133183499030. Can you point me in the right direction? Thanks!

asked by: Richard B

0

Expert Reply:

I can indeed get you the correct hub bearing kit with grease seals for your 2020 Grand Design Imagine 2500RL. What you need is the following:

- Hub Bearing Kit # BK2-100

Just as a reminder, this kit is enough for one hub, so if you want a one kit for all four hubs you'd need to order four.

expert reply by: Kyle S

0

Answer 1

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 2

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 5

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Answer 6

Hey Chad this is a great question. So the MORryde ALLTREK part #MR89DR does offer additional vertical suspension but it does sit a little taller than the equalizers it replaces so you wouldn't have to worry about your tires hitting fenders or…

view full answer...

Answer 7

You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…

view full answer...

Answer 8

Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek…

view full answer...

Answer 9

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Answer 10

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 11

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

view full answer...

Answer 12

The SRE4000 is quite a big improvement over the CRE3000. The SRE4000 provides more suspension travel (4" Vs. 3"), greater road shock absorption, a longer warranty (3 Yrs. Vs. 2 Yrs.), and much more. We also offer the SRE4000 with an…

view full answer...

2020 Grand Design Imagine 2500RL Hub Bearing Kit With Grease Seals

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching