Kit to Convert Toy Hauler Ramp Into Patio/Deck

Question

Question:

I am looking to convert my toy hauler ramp door to a patio/deck. Need brackets and cable. Can’t find a kit on etrailer website.

asked by: Larry H

0

Expert Reply:

The Lippert Patio Upgrade Kit for Toy Hauler Garage Doors # LC27FR is meant to work with the existing brackets and cables for your standard garage door on your toy hauler, but if you need to replace those parts we have the Door Cable # LC39FR which is 121-1/4" long. We don't have any replacement brackets though so you'll have to source those locally.

expert reply by: Jon G

0

Answer 1

The Lippert Patio Upgrade Kit #LC27FR is a replacement rear ramp door that is capable of supporting itself in a patio orientation. Not all doors that come on toy haulers are capable of acting as a patio due to the structure inside the door. This door…

view full answer...

Answer 2

It sounds like you are looking for the neccessary components to turn the fold down door on your 2019 Heartland RV Road Warrior 5W Toy Hauler into a patio. If this is the case the only option we have is the Lippert Components Patio Upgrade Kit for Toy…

view full answer...

Answer 3

The Domar Stabilizer Jack, part #TJ01RT, do have a weight capacity of 650 lbs. I spoke with my contact at Domar and they told me that these would be able to handle the 650 lbs at the point they were attached. If you have a lot of weight concentrated…

view full answer...

Answer 4

We do have a few different options for you! If you are wanting an exact replacement then it looks like you currently have the Command LED Courtesy Light #328-002-04W. For a few different styles we have the Optronics #ILL85CB and #ILL86CB which are…

view full answer...

Answer 5

For your toy hauler patio door I recommend using some drop leg stabilizer jacks like the Stallion Stabilizer Jacks #288-01892-2. These jacks have a retracted height of 15-1/4" and extended height of 22-1/4" and a combined weight capacity of…

view full answer...

Answer 6

So long as you have the needed 8-1/2 foot length across the back of your toy hauler, if you'd like you can install the Thule HideAway Awning - Direct Mount #TH490018. You'll need to be able to access the area behind the top rail where the…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

view full answer...

Answer 12

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...