What is Max Drop for Reese Pro Round Bar Weight Distribution RE34FR

Question

Question:

What is the max for the hitch? It appears to be 4

asked by: Kevin

1

Helpful Expert Reply:

The max drop the Reese weight distribution system part # RE34FR can do is 4 inches like you mentioned.

expert reply by: Jameson C

1

Answer 1

The length from the center of one spring eye to the center of the other spring eye of 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles #e77SR is 26 inches as you can see in the accompanying diagram.

view full answer...

Answer 2

The only weight distribution systems that do not allow backing up are those that use friction sway control (which is an added piece), so yes, you can absolutely back up with the Reese Pro system you asked about, which is the following part number: -…

view full answer...

Answer 3

The Reese #RE34FR Weight Distribution kit can be used while backing your trailer, but if you need to make sharper turns that could possibly cause the trailer to jackknife, you'll want to remove the spring bars before backing the trailer. The…

view full answer...

Answer 4

A weight distribution system like the Reese Pro Round Bar Weight Distribution w Sway Control #RE34FR will work great in distributing the load of your trailer across your axles. The Reese Pro Round Bar Weight Distribution w Sway Control #RE34FR you…

view full answer...

Answer 5

The Reese Pro Round Bar Weight Distribution #RE34FR is the Reese item number 49911. We have to give items different numbers from the manufacturers since we carry so many different items from several different manufacturers. Often times it is more…

view full answer...

Answer 6

As long as you have a hitch installed on your 2005 Chevy Equinox that was rated for weight distribution use like the etrailer part #e98865 weight distribution will be your best option as it will reduce suspension sag like you want, but since it's…

view full answer...

Answer 7

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 8

The Reese Pro Round Bar Weight Distribution Hitch #RE34FR you were looking at cannot be ordered with a different shank, but it is compatible with the Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment #C17123 which gives the rise and…

view full answer...

Answer 9

The distance from the hitch pin hole to the beginning of the reinforcing gusset of the shank provided with the #RE34FR Reese Weight Distribution Kit is 3-7/8 inches, as shown in the provided photo.

view full answer...

Answer 10

Your camper is not too light for a weight distribution system and the Reese Pro Round Bar Weight Distribution item #RE34FR will work on your trailer. This system works with trailer's that have a tongue weight between 200 lbs and 600 lbs. The…

view full answer...

Answer 11

Yes, you will. The Reese Pro Round Bar Weight Distribution System item #RE34FR has built in sway control that will keep your trailer in line with your Ram when you make sudden moves or get passed on the highway by a semi. This system has a tongue…

view full answer...

Answer 12

You'd probably be okay without a weight distribution system but I pulled up the weight of an Airstream Caravel and found that it weighs 3,500 lbs and has a tongue weight of 500 lbs which is enough weight that you would see benefit by going with a…

view full answer...

What is Max Drop for Reese Pro Round Bar Weight Distribution RE34FR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching