6k Trailer Leaf Spring Replacement for 2019 Forest River Vengeance Rogue

Question

Question:

Looking for the right leaf springs for my 2019 Forrest river vengeance rougue 32v toyhauler bumper pull. It had 6k lb axles. I put the 26inch eye to eye on it and it seems to long.

asked by: Thomas E

0

Expert Reply:

The most common leaf spring size for a 6k trailer axle is 25-1/4 inches like what the part # e34SR is. It would be smart to measure what your old one is first though. We have a shorter spring with the part # e47SR which is 25-1/8 inches.

expert reply by: Jameson C

0

Answer 1

The 4-Leaf Double-Eye Spring for 6,000-lb Trailer Axles part #e47SR for all intents and purposes is the same as the SP-221275. They are the same size and capacity, just made by different manufactures but both quality options.

view full answer...

Answer 2

A 5200 lb axle is actually a 6000 lb axle that's been de-rated by using a different outer bearing. The proper replacement leaf spring will depend on how long the original springs are. Because leaf springs flatten out and become longer as…

view full answer...

Answer 3

The best way to determine which leaf springs will work as a replacement is by measuring the old springs from the eye center to eye center. For your 5200-lb Lippert axle, most of your options are going to be fairly close in length. Your axle has 2…

view full answer...

Answer 4

We can tell you how to determine the correct replacement 6,000 lb leaf springs for your 5th wheel trailer, though don't have a way of knowing specifically what is on any one trailer. It's pretty simple though, as all you have to do is measure…

view full answer...

Answer 5

It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…

view full answer...

Answer 6

I believe you are referencing our 6k double-eye leaf springs, the 4-leaf, 25-1/8" long #e47SR and 5-leaf, 25-1/4" long #e34SR. The number of leaves won't make a huge difference, but fewer leaves can give you a slightly softer ride. So…

view full answer...

Answer 7

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 8

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 9

Yes, going from a 4 leaf to a 6 leaf spring would add slightly to your ride height. For example, if the current 4 leaf spring has 3/8" thick leaves, and you go to a 6 leaf spring with 3/8" thick leaves, you would be adding 3/4" of…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 12

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

6k Trailer Leaf Spring Replacement for 2019 Forest River Vengeance Rogue

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching