Pictures of the etrailer Hitch e98848 Installed on a 2024 Honda CR-V

Question

Question:

Do you have any pictures of your etrailer hitch installed on a 2024 Honda CR-V?

asked by: Bill M

0

Expert Reply:

Yes, we do and I have attached them below! The etrailer Hitch item # e98848 is custom fit and bolts to your 2024 Honda CR-V with included hardware. This hitch fits all models of the 2024 CR-V including the hybrid.

The etrailer item # e98848 is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like this hitch because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible.

If you are planning on towing you will also need a wiring harness item # C56370 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

2024 Honda CR-V
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 4

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

Yes, the etrailer Trailer Hitch Receiver part #e98848 which is what I recommend, is a confirmed fit for a 2023 Honda CR-V Hybrid Sport Touring. It also has a 2" opening so it will be great for towing or other hitch mounted accessories like bike…

view full answer...

Answer 9

Yes, the etrailer Trailer Hitch Receiver #e98848 will fit perfectly on your 2024 Honda CR-V Hybrid, and will till allow the hands free liftgate feature to work as well if that's something your vehicle is equipped with. You'll just have to…

view full answer...

Answer 10

Fascia trimming is required to install the etrailer Trailer Hitch Receiver #e98848 on your 2024 Honda CR-V, but this is the case for all of the hitches that fit your vehicle. According to the instructions you'll be cutting out a notch that is…

view full answer...

Answer 11

Yes, we have since been able to confirm the etrailer Trailer Hitch Receiver part #e98848 will fit a 2021 Honda CR-V Hybrid after some confusion early on. There have been multiple reviews from our customers stating it was compatible. I have attached a…

view full answer...

Answer 12

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...